Configuration steps

Following is a summary of the steps required to configure SD-WAN using FortiManager:

1. Configure the overlay using the SD-WAN overlay template. See Creating an overlay template.
2. Assign metadata values to branch devices. See Assigning meta data values to branch devices.
3. Configure SD-WAN rules. See Configuring SD-WAN rules.
4. Create normalized interfaces. See Creating normalized interfaces.
5. Create policy packages and firewall policies for hub and branch devices. See Creating policy packages and firewall policies.
6. Install policy packages to devices. See Installing policy packages.
7. Verify the SD-WAN configuration. See Verifying the SD-WAN configuration .