Fortinet black logo

Administration Guide

Home FortiManager 7.2.2 Administration Guide

Create a new FortiProxy proxy auto-configuration (PAC) policy

7.2.2
7.4.2
7.4.1
7.4.0
7.2.5
7.2.4
7.2.3
7.2.2
7.2.1
7.2.0
7.0.12
7.0.11
7.0.10
7.0.9
7.0.8
7.0.7
7.0.6
7.0.5
7.0.4
7.0.3
7.0.2
7.0.1
7.0.0
6.4.14
6.4.13
6.4.12
6.4.11
6.4.10
6.4.9
6.4.8
6.4.7
6.4.6
6.4.5
6.4.4
6.4.3
6.4.2
6.4.1
6.4.0
6.2.12
6.2.11
6.2.10
6.2.9
6.2.8
6.2.7
6.2.6
6.2.6
6.2.5
6.2.3
6.2.2
6.2.1
6.2.0
6.0.12
6.0.11
6.0.10
6.0.9
6.0.8
6.0.7
6.0.6
6.0.5
6.0.4
6.0.3
6.0.2
6.0.1
6.0.0
5.6.11
5.6.10
5.6.9
5.6.8
5.6.7
5.6.6
5.6.5
5.6.4
5.6.3
5.6.2
5.6.1
5.6.0
5.4.7
5.4.6
5.4.5
5.4.4
5.4.3
5.4.2
5.4.1
5.4.0
5.2.10
5.2.7
5.2.6
5.2.4
5.2.3
5.2.2
5.2.1
5.2.0
5.0.12
5.0.11
5.0.10
5.0.9
5.0.8
5.0.7
5.0.6
5.0.5
5.0.4
5.0.3
5.0.2
4.3.8
4.3.7
4.3.6
4.3.5
4.3.4
4.3.3
4.3.2
4.3.1
4.3.0
4.2.9
4.2.8
4.2.7
4.2.6
4.2.5
4.2.4
4.2.3
4.2.2
4.2.1
4.2.0
4.1.0
4.0.3
4.0.2
4.0.1
4.0.0
Copy Link
Copy Doc ID 685e995b-337a-11ed-9d74-fa163e15d75b:735441
Download PDF

Create a new FortiProxy proxy auto-configuration (PAC) policy

Tooltip

Proxy auto-configuration (PAC) policies are only available in FortiProxy ADOMs. See FortiProxy ADOMs.

For more information on configuring a PAC policy, see the FortiProxy Administration Guide on the Fortinet Document Library.
Note

You must enable the visibility of this feature in Policy & Objects before it can be configured. To toggle feature visibility, go to Policy & Objects > Tools > Feature Visibility, and add or remove a checkmark for the corresponding feature.
To create a PAC policy:
  1. Ensure that you are in a FortiProxy ADOM.
  2. Go to Policy & Objects > Policy Packages.
  3. Select Firmware Visibility from the Tools dropdown, and add a check mark next to the PAC Policy type.
  4. In the tree menu for the policy package in which you will be creating the new policy, select PAC Policy.
  5. Click Create New.
  6. Enter the following information:

    ID

    Enter a policy ID or leave the field as the default to automatically assign a policy ID.

    Status

    Enable or Disable the policy.

    Original Address

    Select the original address.

    Source Address IPv6

    Optionally, provide the source IPv6 address.

    Destination Address

    Select the destination address.

    PAC File Name

    The name of the PAC file.

    Comments

    Optionally, provide comments.

    PAC File Content

    Enter the PAC file content.

    For more information, see the FortiProxy Administration Guide on the Fortinet Document Library.

  7. Click OK to create the policy. You can select to enable or disable the policy in the right-click menu. When disabled, a disabled icon will be displayed in the Seq.# column to the left of the number. By default, policies will be added to the bottom of the list, but above the implicit policy.
Previous
Next

Create a new FortiProxy proxy auto-configuration (PAC) policy

Tooltip

Proxy auto-configuration (PAC) policies are only available in FortiProxy ADOMs. See FortiProxy ADOMs.

For more information on configuring a PAC policy, see the FortiProxy Administration Guide on the Fortinet Document Library.
Note

You must enable the visibility of this feature in Policy & Objects before it can be configured. To toggle feature visibility, go to Policy & Objects > Tools > Feature Visibility, and add or remove a checkmark for the corresponding feature.
To create a PAC policy:
  1. Ensure that you are in a FortiProxy ADOM.
  2. Go to Policy & Objects > Policy Packages.
  3. Select Firmware Visibility from the Tools dropdown, and add a check mark next to the PAC Policy type.
  4. In the tree menu for the policy package in which you will be creating the new policy, select PAC Policy.
  5. Click Create New.
  6. Enter the following information:

    ID

    Enter a policy ID or leave the field as the default to automatically assign a policy ID.

    Status

    Enable or Disable the policy.

    Original Address

    Select the original address.

    Source Address IPv6

    Optionally, provide the source IPv6 address.

    Destination Address

    Select the destination address.

    PAC File Name

    The name of the PAC file.

    Comments

    Optionally, provide comments.

    PAC File Content

    Enter the PAC file content.

    For more information, see the FortiProxy Administration Guide on the Fortinet Document Library.

  7. Click OK to create the policy. You can select to enable or disable the policy in the right-click menu. When disabled, a disabled icon will be displayed in the Seq.# column to the left of the number. By default, policies will be added to the bottom of the list, but above the implicit policy.
Previous
Next