Fortinet white logo
Fortinet white logo

Administration Guide

Meta Fields

Meta Fields

Meta fields allow administrators to add additional attributes to objects and administrators. You can make meta fields required or optional.

When meta fields are required, administrators must supply additional information when they create an associated object. For example, if you create a required meta field for a device object, administrators must define a value for that meta field for all devices.

Go to System Settings > Advanced > Meta Fields to configure meta fields. Meta fields can be added, edited, and deleted.

Tooltip

Meta fields cannot be used as variables in scripts or provisioning templates. Instead, you can use ADOM-level metadata variables which can be created in Policy & Objects. See ADOM-level metadata variables.

Select Expand All or Collapse All from the toolbar or right-click menu to view all or none of the meta fields under each object.

To create a new meta field:
  1. Go to System Settings > Advanced > Meta Fields.
  2. Click Create New in the toolbar. The Create New Meta Field pane opens.

  3. From the Object field, select an object.

    Some objects also allow you to define a value for the meta field for each device.

    Object

    The object this metadata field applies to: Administrative Domain, Central NAT, Device, Device Group, Device VDOM, Firewall Address, Firewall Address Group, Firewall Policy, Firewall Service, Firewall Service Group, or System Administrator.

  4. Configure the following settings:

    Name

    Enter the label to use for the field.

    When you type the name, a variable name is automatically created.

    Length

    Select the maximum number of characters allowed for the field from the dropdown list: 20, 50, or 255.

    Importance

    Select Required to make the field compulsory; otherwise, select Optional.

    Status

    Select Disabled to disable this field. The default selection is Enabled.

    This field is only available for non-firewall objects.

  5. Click OK.

    The meta field is created.

To edit a meta field:
  1. Go to System Settings > Advanced > Meta Fields.
  2. Double-click on a field, right-click on a field and then select Edit from the menu, or select a field then click Edit in the toolbar. The Edit Meta Fields pane opens.
  3. Edit the settings as required, and then click OK to apply the changes.

The Object and Name fields cannot be edited.

To delete a meta field or fields:
  1. Go to System Settings > Advanced > Meta Fields.
  2. Select the field or fields you need to delete.
  3. Click Delete in the toolbar, or right-click and select Delete.
  4. Click OK in the confirmation box to delete the field or fields.

The default meta fields cannot be deleted.

Meta Fields

Meta Fields

Meta fields allow administrators to add additional attributes to objects and administrators. You can make meta fields required or optional.

When meta fields are required, administrators must supply additional information when they create an associated object. For example, if you create a required meta field for a device object, administrators must define a value for that meta field for all devices.

Go to System Settings > Advanced > Meta Fields to configure meta fields. Meta fields can be added, edited, and deleted.

Tooltip

Meta fields cannot be used as variables in scripts or provisioning templates. Instead, you can use ADOM-level metadata variables which can be created in Policy & Objects. See ADOM-level metadata variables.

Select Expand All or Collapse All from the toolbar or right-click menu to view all or none of the meta fields under each object.

To create a new meta field:
  1. Go to System Settings > Advanced > Meta Fields.
  2. Click Create New in the toolbar. The Create New Meta Field pane opens.

  3. From the Object field, select an object.

    Some objects also allow you to define a value for the meta field for each device.

    Object

    The object this metadata field applies to: Administrative Domain, Central NAT, Device, Device Group, Device VDOM, Firewall Address, Firewall Address Group, Firewall Policy, Firewall Service, Firewall Service Group, or System Administrator.

  4. Configure the following settings:

    Name

    Enter the label to use for the field.

    When you type the name, a variable name is automatically created.

    Length

    Select the maximum number of characters allowed for the field from the dropdown list: 20, 50, or 255.

    Importance

    Select Required to make the field compulsory; otherwise, select Optional.

    Status

    Select Disabled to disable this field. The default selection is Enabled.

    This field is only available for non-firewall objects.

  5. Click OK.

    The meta field is created.

To edit a meta field:
  1. Go to System Settings > Advanced > Meta Fields.
  2. Double-click on a field, right-click on a field and then select Edit from the menu, or select a field then click Edit in the toolbar. The Edit Meta Fields pane opens.
  3. Edit the settings as required, and then click OK to apply the changes.

The Object and Name fields cannot be edited.

To delete a meta field or fields:
  1. Go to System Settings > Advanced > Meta Fields.
  2. Select the field or fields you need to delete.
  3. Click Delete in the toolbar, or right-click and select Delete.
  4. Click OK in the confirmation box to delete the field or fields.

The default meta fields cannot be deleted.