Known Issues
The following issues have been identified in 7.4.0. To inquire about a particular bug or to report a bug, please contact Customer Service & Support.
AP Manager
Bug ID |
Description |
---|---|
861941 | FortiManager attempts to install "arrp-profile " even if "darrp " is disabled.
|
865486 | The FortiManager's AP Manager permits the use of invalid channels with a 40MHz channel width. |
884233 |
FortiManager displays the AP critical security vulnerability info even after FortiAPs are being upgraded. |
892773 | Assigning AP Profile returns invalid value. |
906930 | FortiManager displays an error for Subnets overlap for a Bridge SSID. |
Device Manager
Bug ID |
Description |
---|---|
768289 | There is a discrepancy in the usage of quotation marks ("") when configuring DHCP relay from FortiManager or retrieving it from FortiGate. |
831624 | SD-WAN Monitor under the
Monitors displays time frame as "invalid date - invalid date ". |
895001 |
The "gui-ztna" configuration is displayed as enabled on the FortiManager even though this setting is disabled on the FortiGate. |
896367 | The geographic coordination
config of FortiGates on Device Manager is being reset to 0,0 after a certain period
of time. |
899350 | Promote button is missing for FortiGate 80F Clusters. |
902908 | Managed FortiAnalyzer is not listed under System Template. |
905869 | Invalid default value for VRF ID is observed when creating static route. |
906558 | Importing a Revision fails and displays a runtime error. |
909867 | FortiManager attempts to configure
unsupported syntax for "sdwan health-check ". |
910391 | When FortiManageroperates in a non-default workspace mode, it may attempt to purge the configuration of the FortiGate devices due to database corruption. |
911535 | Adding a Model device with MetaVariables changes the status of other devices which using the MetaVariables to Modified/unknown. |
912833 | When adding FortiGates with Open Authentication (OAuth) Method, Fortinet Security Fabric dialog box does not display the FortiManager's related info. |
915361 | FortiWiFi devices are displayed in FortiManager under the Vulnerable devices as FortiAP. |
917969 | FortiManager is unable to search static routes via its interface name. |
918292 | The SDWAN services cannot be modified, and attempting to make changes results in an "Invalid Value" error message. |
921094 |
In 6.2 or 6.4 ADOMs, problems might occur when attempting to add or modify static routes. Workarounds: Please create a fresh backup of your FMG and FGT, then try either of the following:
|
925546 | Assigned Devices on Provisioning Template/CLI Template shows incorrect VDOM. |
925684 | Only a maximum of 10 devices can be previewed before installation using "install preview". |
925854 |
FortiManager fails to load the Security fabric data for FortiGates (Versions 7.0.5+ & 7.2.5). |
931736 | Adding a new cli template script into existing cli template group changes order of cli templates to alphabetical order. |
FortiSwitch Manager
Bug ID |
Description |
---|---|
881766 | Event logs or task manager do not show which user authorized a FortiSwitch. |
922068 | FortiSwitch Manager does not display any ports for managed switches. |
Global ADOM
Bug ID |
Description |
---|---|
894714 | FortiManager does not allow creating/modification or removing the per-device mapping in global objects in assigned ADOM. |
906058 | Firewall address cannot be deleted from Global ADOM; it displays an error message indicating that the object is being used in ADOM root. |
925188 | The per-device mapping for any assigned global objects cannot be modified. |
Others
Bug ID |
Description |
---|---|
880465 | TCP ports 8902 & 8903 are opened and in listening mode after the upgrade. |
885665 | Unable to specify type of objects in FortiProxy ADOM. |
894947 | FortiManager fails to trigger the event handler for its local events after enabling the FortiAnalyzer features. |
895982 |
Admin with a super user profile is not able to create the Firmware Template when FortiManager is working in the Workflow mode. |
897157 |
Unexpected changes in existing static routes, created by static route template after upgrade to 7.0.7, 7.2.2, 7.4.0. |
910175 | When provisioning the FortiExtender via CLI template, FortiManager displays the "mismatch interface" error message. |
914027 | FortiManager does not display/use the latest ISDB version for all of its ADOMs. |
916463 | The approval emails are not being sent to the "Email Notification" admins when a new session is created and submitted for approval. |
917834 | Report Definitions cannot be viewed or modified from FortiManager when FortiAnalyzer is being managed by FortiManager. |
918129 | FortiManager does not support the AWS Security Token Service in AWS SDN connector. |
919088 |
GUI may not work properly in Google Chrome and Microsoft Edge version 114. |
919981 | Installation fails to Azure FortiGate standalone as FortiManager attempts to set the peervd to "root". |
921273 | Unable to upgrade ADOMs due to the XSS vulnerability characters check on wireless-controller. |
925778 |
FortiGate's are displayed offline and inactive on FortiWLM MEA. |
930305 | Firmware template upgrade preview shows incorrect versions for the upgrade. |
Policy & Objects
Bug ID |
Description |
---|---|
777017 |
FortiManager purges the " |
845022 | SDN Connector failed to import objects from VMware VSphere. |
863819 | Unable to delete unused objects. |
869863 | NSX connector, unable to unselect the group with no users. |
873358 | Installation fails as FortiManager tries
to set "cgn-client-startip " and "cgn-client-endip "
settings when ippool object has been modified. |
880418 | The default values of the Application Control Profile entries cannot be changed. |
883064 | If any admin makes changes to "Object Selection Pane", either setting it to "Dock to Right", "Dock to Bottom", or "Classic Dual Pane", it will affects all other Admin's GUI preferences. |
889586 | Azure Service Tags not displayed correctly in FortiManager. |
894597 | Default value for
unsupported-ssl-version in ssl-ssh-profile gets modified during
the installation. |
896461 | FortiManager disables ip6-send-adv after
opening and closing interface configuration. |
896491 | Installation fails with unclear error message: "vdom copy failed". |
898883 | Exported firewall policies do not contain firewall address values IP, netmask, and other details. |
902298 | FortiManager does not generate error messages when invalid or obsolete application IDs are used in the policy. Instead, it allows installation and sets the category to "pass" or "monitor". |
911146 | Under the Policy & Objects, GUI does not display the Address Object list. |
912114 | FortiManager is unable to import OpenStack SDN connector and the following error message is displayed: "send_sdn_connector_openstack_cmd: Failed to get openstack token". |
914945 | Unable to modify or clone the "SSL/SSH inspection profile" in the Policy & Object on the ADOM 7.0 version. |
914981 | In Policy & Objects, local policy is not displayed if view mode "Interface pair view" is selected. |
916459 | The option "Allow Websites When a Rating Error Occurs" is not being saved correctly in the default web filter. |
919415 |
Unable to "Edit" and "Delete" Installation Target after enable classic dual pane mode. |
919681 | The incoming and outgoing interfaces are not loading after creating a custom policy package in a 7.2 FortiGate ADOM. |
920740 | Unable to create a per device mapping for a virtual server. |
920983 | The policy blocks using a group object do not get updated when the objects within the group are modified. |
922648 | FortiManager unable to push WiFi SSID to FortiGates. |
925058 | "Web URL Filter" entries are not visible in the Web Filter Profile. |
925076 | FortiManager tries to install different preconnection-id under VPN SSL WEB Portal > Profile > Bookmark-Group > Gui-Bookmark > Book. |
Script
Bug ID |
Description |
---|---|
913360 | Device script is trying to add additional configuration therefore installation gets failed. |
931196 | Scheduled Scripts created by the ldap users cannot be run and FortiManager displays "Data is not ready" error message. |
System Settings
Bug ID |
Description |
---|---|
733279 | After changing the http or https port, FortiManager displays an "Unknown Error." error message. |
861997 | Unable to delete a particular non-default empty ADOM. |
890956 | SAML SSO Authentication only works with the default local certs. |
VPN Manager
Bug ID |
Description |
---|---|
847479 | Despite being configured for 'SHA-256,' FortiManager is installing 'SHA-1' certificates on FortiGates. |
863424 | The "Latest Patch Level" should be available with action "Check-up-to-date" under the SSL VPN Portal. |
931564 | In VPN Manager, ipsec vpn map, topology view, and traffic view does not display map normally. |