RADIUS auth source
The RADIUS Service Connector allows FortiNAC to authenticate users with a RADIUS account for user registrations and Administration UI access.
Field |
Definition |
Profile Name |
Name displayed in the RADIUS server list. Name of the connection configuration for the connection between an MDM system and FortiNAC. |
Host Name/IP Address |
Host name or IP address of the RADIUS server. |
RADIUS Secret |
Encryption key used by the RADIUS server to send authentication information. |
Authentication Port |
Port number through which the RADIUS server communicates. |
Accounting Port |
Port number that the RADIUS server uses for the accounting features, if they are used. If your RADIUS server does not use accounting features, disable the field. |
Validation Account |
|
User Name |
User name for verifying access to the RADIUS Server. This field is required, but only used when there are multiple RADIUS Servers configured. You must create an account on the RADIUS Server that is used by FortiNAC to communicate with that Server. The encryption method must be set to PAP. |
Password |
Password for verifying access to the RADIUS server. This field is required. |