Configuring logical networks

You can create, modify, or delete all logical networks shown in the Logical Networks tab, including the pre-defined logical networks if they were added using the 'Add Predefined Network Access Policies' task during the guided installation.

Creating a logical network

1. Go to Network > Logical Networks.
2. Click Create New.
3. Enter a Name for the logical network.
4. (Optional) Enter a Description.
5. Click OK.

Modifying a logical network

1. Go to Network > Logical Networks.
2. Click the logical network and click Modify.
3. Modify the Name and/or Description.
4. Click OK.

Deleting a logical network

1. Go to Network > Logical Networks.

2. Click the logical network and click Delete.

   You cannot delete a logical network that is currently in use. Click In Use to check if a logical network is in use.

3. Click OK to confirm.