Fortinet Document Library

Version:


Table of Contents

6.0.0
Download PDF
Copy Link

Configuring 3D Maps

Before you can begin using the 3D map for surveillance and add a map to your video pane, you first must configure the 3D map in FortiCentral.

To configure a 3D map

  1. Select the Settings button and go to the 3D Maps section.
  2. Name the floor plan and select the button to select a floor plan image. FortiCentral supports .jpg, .jpeg, .png, .bmp, .tif, and .tiff image files. 3D maps can be exported and transferred to other computers by going to Settings > Import/Export > Import/Export 3D Maps.
  3. Enter an image width and height to help scale the map and ensure correct visualization cones.
  4. Select Apply and then OK to save your map. Once your map is saved it will appear in the Device Panel.

Configuring 3D Maps

Before you can begin using the 3D map for surveillance and add a map to your video pane, you first must configure the 3D map in FortiCentral.

To configure a 3D map

  1. Select the Settings button and go to the 3D Maps section.
  2. Name the floor plan and select the button to select a floor plan image. FortiCentral supports .jpg, .jpeg, .png, .bmp, .tif, and .tiff image files. 3D maps can be exported and transferred to other computers by going to Settings > Import/Export > Import/Export 3D Maps.
  3. Enter an image width and height to help scale the map and ensure correct visualization cones.
  4. Select Apply and then OK to save your map. Once your map is saved it will appear in the Device Panel.