Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

Administration Guide

SNMP

In version 3.0.6 and later, all admin ports that are specified support SNMP.

SNMP is a method for a FortiSandbox system to monitor FortiSandbox on your local computer. You need an SNMP agent on your computer to read SNMP information.

Using SNMP, your FortiSandbox system monitors for system events including CPU usage, memory usage, log disk space, malware detection, HA topology changes, and health check status changes. Go to System > SNMP to configure the FortiSandbox SNMP settings.

SNMP has two parts - the SNMP agent or the device that is sending traps, and the SNMP manager that monitors those traps. The SNMP communities on the monitored FortiSandbox are hard coded and configured in the SNMP menu.

The FortiSandbox SNMP implementation is read-only — SNMP v1, v2c, v3 compliant SNMP manager applications, such as those on your local computer, have read-only access to FortiSandbox system information and can receive FortiSandbox system traps.

From here you can download FortiSandbox and Fortinet core MIB files.

When one plug is cut off, the unit will send out SNMP trap and generate a log. Only 3000D, 3500D, 2000E, and 3000E models are supported.

SNMP

In version 3.0.6 and later, all admin ports that are specified support SNMP.

SNMP is a method for a FortiSandbox system to monitor FortiSandbox on your local computer. You need an SNMP agent on your computer to read SNMP information.

Using SNMP, your FortiSandbox system monitors for system events including CPU usage, memory usage, log disk space, malware detection, HA topology changes, and health check status changes. Go to System > SNMP to configure the FortiSandbox SNMP settings.

SNMP has two parts - the SNMP agent or the device that is sending traps, and the SNMP manager that monitors those traps. The SNMP communities on the monitored FortiSandbox are hard coded and configured in the SNMP menu.

The FortiSandbox SNMP implementation is read-only — SNMP v1, v2c, v3 compliant SNMP manager applications, such as those on your local computer, have read-only access to FortiSandbox system information and can receive FortiSandbox system traps.

From here you can download FortiSandbox and Fortinet core MIB files.

When one plug is cut off, the unit will send out SNMP trap and generate a log. Only 3000D, 3500D, 2000E, and 3000E models are supported.