Fortinet black logo

Administration Guide

Reboot and shut down the unit

Copy Link
Copy Doc ID 7885f8f7-912a-11e9-81a4-00505692583a:149415
Download PDF

Reboot and shut down the unit

Always reboot and shut down the FortiSandbox system using the options in the GUI or CLI to avoid potential configuration or hardware problems.

To reboot the FortiSandbox unit:
  1. Go to Dashboard > System Resources widget.
  2. Select Reboot.
  3. Enter a reason for the reboot in the Reason field, and then select OK to reboot the unit.
  4. After reboot, the FortiSandbox VM system will initialize again. This initialization can take up to 30 minutes. The Windows VM icon in the System Information widget will show a warning sign before the process completes.
It is normal to see the following critical event log in Log Access after FortiSandbox boots up:

The VM system is not running and might need more time to startup. Please check system logs for more details. If needed, please reboot system.

After FortiSandbox is upgraded to a new firmware version, the system might clean up data and a Database is not ready message will be displayed. The clean up time depends on the size of historical data.

To shut down the FortiSandbox unit:
  1. Go to Dashboard > System Resources widget.
  2. Select Shutdown.
  3. Enter a reason for the shutdown in the Reason field.
  4. Select OK to shutdown the unit.

Reboot and shut down the unit

Always reboot and shut down the FortiSandbox system using the options in the GUI or CLI to avoid potential configuration or hardware problems.

To reboot the FortiSandbox unit:
  1. Go to Dashboard > System Resources widget.
  2. Select Reboot.
  3. Enter a reason for the reboot in the Reason field, and then select OK to reboot the unit.
  4. After reboot, the FortiSandbox VM system will initialize again. This initialization can take up to 30 minutes. The Windows VM icon in the System Information widget will show a warning sign before the process completes.
It is normal to see the following critical event log in Log Access after FortiSandbox boots up:

The VM system is not running and might need more time to startup. Please check system logs for more details. If needed, please reboot system.

After FortiSandbox is upgraded to a new firmware version, the system might clean up data and a Database is not ready message will be displayed. The clean up time depends on the size of historical data.

To shut down the FortiSandbox unit:
  1. Go to Dashboard > System Resources widget.
  2. Select Shutdown.
  3. Enter a reason for the shutdown in the Reason field.
  4. Select OK to shutdown the unit.