Fortinet black logo

Administration Guide

System Routing

Copy Link
Copy Doc ID 7885f8f7-912a-11e9-81a4-00505692583a:805042
Download PDF

System Routing

The System Routing page allows you to manage static routes on your FortiSandbox device. Go to Network > System Routing to view the routing list.

The following options are available:

Create New

Select to create a new static route.

Edit

Select a static route in the list and click Edit in the toolbar to edit the entry.

Delete

Select a static route in the list and click Delete in the toolbar to delete the entry.

The following information is displayed:

IP/Mask

Displays the IP address and subnet mask.

Gateway

Displays the gateway IP address.

Device

Displays the interface associated with the static route.

Number of Routes

Displays the number of static routes configured.

To create a new static route:
  1. Click Create New from the toolbar.
  2. Enter a destination IP address and mask, and a gateway, in their requisite fields.

    The destination IP/Mask can be entered in the format 192.168.1.2/255.255.255.0, 192.168.1.2/24, or fe80:0:0:0:0:0:c0a8:1fe.

    The following subnets are reserved for use by FortiSandbox. Do not configure static routes for IP address ranges falling into it.

    • 192.168.56.0/24
    • 192.168.57.0/24
    • 192.168.250.0/24
  3. Select a device (or interface) from the dropdown list.
  4. Click OK to create the new static route.
To edit a static route:
  1. Select a Static Route.
  2. Click the Edit button.
  3. Edit the destination IP address and mask, gateway, and device (or interface) as required.
  4. Click OK to apply the edits to the static route.
To delete a static route or routes:
  1. Select one or more Static Routes.
  2. Click the Delete button from the toolbar.
  3. Select Yes, I’m sure on the confirmation page to delete the selected route or routes.

Static route entries defined in this page is for the system to use and will not be applied to traffic originating from the guest VM during a file's execution.

System Routing

The System Routing page allows you to manage static routes on your FortiSandbox device. Go to Network > System Routing to view the routing list.

The following options are available:

Create New

Select to create a new static route.

Edit

Select a static route in the list and click Edit in the toolbar to edit the entry.

Delete

Select a static route in the list and click Delete in the toolbar to delete the entry.

The following information is displayed:

IP/Mask

Displays the IP address and subnet mask.

Gateway

Displays the gateway IP address.

Device

Displays the interface associated with the static route.

Number of Routes

Displays the number of static routes configured.

To create a new static route:
  1. Click Create New from the toolbar.
  2. Enter a destination IP address and mask, and a gateway, in their requisite fields.

    The destination IP/Mask can be entered in the format 192.168.1.2/255.255.255.0, 192.168.1.2/24, or fe80:0:0:0:0:0:c0a8:1fe.

    The following subnets are reserved for use by FortiSandbox. Do not configure static routes for IP address ranges falling into it.

    • 192.168.56.0/24
    • 192.168.57.0/24
    • 192.168.250.0/24
  3. Select a device (or interface) from the dropdown list.
  4. Click OK to create the new static route.
To edit a static route:
  1. Select a Static Route.
  2. Click the Edit button.
  3. Edit the destination IP address and mask, gateway, and device (or interface) as required.
  4. Click OK to apply the edits to the static route.
To delete a static route or routes:
  1. Select one or more Static Routes.
  2. Click the Delete button from the toolbar.
  3. Select Yes, I’m sure on the confirmation page to delete the selected route or routes.

Static route entries defined in this page is for the system to use and will not be applied to traffic originating from the guest VM during a file's execution.