Link log messages
The log messages in this chapter are for link issues.
Physical port active or inactive trunk member
ID |
1000 |
Type |
Event log |
Subtype |
Link |
Severity |
Notice |
Message |
|
Meaning |
The specified physical port is now an active or inactive member of the specified trunk. |
DMI port changed
ID |
1050 |
Type |
Event log |
Subtype |
Link |
Severity |
Notice |
Message |
msg=\"<port_name>\" |
Meaning |
There was a change in the physical port used for the diagnostic monitoring interface (DMI). |
Trunk status
ID |
1200 |
Type |
Event log |
Subtype |
Link |
Severity |
Warning |
Message |
msg=\"<port_name>\" |
Meaning |
One of the members of a trunk is down. |
Loopback error
ID |
1250 |
Type |
Event log |
Subtype |
Link |
Severity |
Warning |
Message |
msg=\"An illegal loopback occurred on adapter (<port_name>)\nCheck the configuration to verify that all adapters are connected to 802.3ad compliant switch ports.\" |
Meaning |
A loopback occurred in a link aggregation group (LAG). |
ICL ACL change
ID |
1300 |
Type |
Event log |
Subtype |
Link |
Severity |
Notice |
Message |
msg=\"MCLAG: ICL ACL change ingress-port-bitmap=<port_name>, egress-block-port-bitmap=<port_name>\" |
Meaning |
There was a change in the access control list (ACL) policy used by the MCLAG ICL trunk. |
An MCLAG peer lost
ID |
1301 |
Type |
Event log |
Subtype |
Link |
Severity |
Notice |
Message |
msg=\"MCLAG: lost peer info for trunk(<trunk_name>) peer-timeout(<time>) sb(<split-brain>)\" |
Meaning |
The FortiSwitch unit cannot detect one of the MCLAG peers. |
Model mismatch of MCLAG peers
ID |
1302 |
Type |
Event log |
Subtype |
Link |
Severity |
Warning |
Message |
msg=\"MCLAG: **Unsupported config, peer model mismatch local-model(<switch1_model>) peer-model(<peer_switch2_model>)\" |
Meaning |
The MCLAG peers are different FortiSwitch models. |
Model mismatch of MCLAG peers fixed
ID |
1303 |
Type |
Event log |
Subtype |
Link |
Severity |
Notice |
Message |
msg=\"MCLAG: Cleared **Unsupported config, peer model mismatch local-model(<switch1_model>) peer-model(<switch2_model>)\" |
Meaning |
The MCLAG peers have been changed to be the same FortiSwitch model. |
Software mismatch of MCLAG peers
ID |
1304 |
Type |
Event log |
Subtype |
Link |
Severity |
Warning |
Message |
msg=\"MCLAG: **peer software mismatch local-software(<switch1_firmware>) peer-software(<switch2_firmware>)\" |
Meaning |
The MCLAG peers are running different versions of FortiSwitchOS. |
Software mismatch of MCLAG peers fixed
ID |
1305 |
Type |
Event log |
Subtype |
Link |
Severity |
Notice |
Message |
msg=\"MCLAG: Cleared **peer software mismatch local-software(<switch1_firmware>) peer-software(<switch2_firmware>)\" |
Meaning |
The MCLAG peers are now running the same version of FortiSwitchOS. |
One MCLAG peer link up
ID |
1306 |
Type |
Event log |
Subtype |
Link |
Severity |
Notice |
Message |
msg=\"MCLAG: <trunk_name> at least one peer link up\" |
Meaning |
One or more of the MCLAG peer links is up. |
All MCLAG peer links down
ID |
1307 |
Type |
Event log |
Subtype |
Link |
Severity |
Notice |
Message |
msg=\"MCLAG: <trunk_name> all peer link down\" |
Meaning |
All MCLAG peer links are down. |
MCLAG peer misconfigured
ID |
1308 |
Type |
Event log |
Subtype |
Link |
Severity |
Notice |
Message |
msg=\"MCLAG: <trunk_name> peer misconfigured\" |
Meaning |
One of the MCLAG peers is misconfigured. |
MCLAG peer misconfigured fixed
ID |
1309 |
Type |
Event log |
Subtype |
Link |
Severity |
Notice |
Message |
msg=\"MCLAG: <trunk_name> peer misconfiguriation cleared\" |
Meaning |
The MCLAG peers are configured correctly now. |
MCLAG misconfigured
ID |
1310 |
Type |
Event log |
Subtype |
Link |
Severity |
Critical |
Message |
msg=\"MCLAG: misconfigured out of LAG table entry\" |
Meaning |
The MCLAG is misconfigured. |
MAC addresses unsynchronized in MCLAG peers
ID |
1311 |
Type |
Event log |
Subtype |
Link |
Severity |
Warning |
Message |
msg=\"MCLAG:<trunk_name> ports=<port_name> MAC mismatch local-mac= peer-mac=\" |
Meaning |
MAC addresses in MCLAG peers are not synchronized. |
Switch port up
ID |
1400 |
Type |
Event log |
Subtype |
Link |
Severity |
Information |
Message |
msg=\"<switch_serial_number> switch port <port_name> has come up\" |
Meaning |
The specified FortiSwitch port is now up. |
Switch port down
ID |
1401 |
Type |
Event log |
Subtype |
Link |
Severity |
Information |
Message |
msg=\"<switch_serial_number> switch port <port_name> has gone down\" |
Meaning |
The specified FortiSwitch port is now down. |
Switch interface link changed
ID |
1450 |
Type |
Event log |
Subtype |
Link |
Severity |
Notice |
Message |
msg=\"interface <interface_name> link status is <status>\" |
Meaning |
The status of the specified interface link has changed. |