Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

Introduction

This document provides the following information for FortiSwitchOS 7.0.4 build 0071.

See the Fortinet Document Library for FortiSwitchOS documentation.

Supported models

FortiSwitchOS 7.0.4 supports the following models:

FortiSwitch 1xx FS-108E, FS-108E-POE, FS-108E-FPOE, FS-108F, FS-108F-POE, FS-108F-FPOE, FS-124E, FS-124E-POE, FS-124E-FPOE, FS-124F, FS-124F-POE, FS-124F-FPOE, FS-148E, FS-148E-POE, FS-148F, FS-148F-POE, FS-148F-FPOE
FortiSwitch 2xx FS-224D-FPOE, FS-224E, FS-224E-POE, FS-248D, FS-248E-POE, FS-248E-FPOE
FortiSwitch 4xx FS-424D, FS-424D-FPOE, FS-424D-POE, FS-424E, FS-424E-POE, FS-424E-FPOE, FS-424E-Fiber, FS-M426E-FPOE, FS-448D, FS-448D-FPOE, FS-448D-POE, FS-448E, FS-448E-POE, FS-448E-FPOE
FortiSwitch 5xx FS-524D-FPOE, FS-524D, FS-548D, FS-548D-FPOE
FortiSwitch 1xxx FS-1024D, FS-1024E, FS-1048D, FS-1048E, FS-T1024E
FortiSwitch 3xxx FS-3032D, FS-3032E
FortiSwitch Rugged FSR-112D-POE, FSR-124D

What’s new in FortiSwitchOS 7.0.4

Release 7.0.4 provides the following new features:

  • Administrators can now use the following commands to control whether users can log in with the FortiSwitchOS console port:
    config system console
    	set login {enable | disable}
    end			

    By default, users can log in with the FortiSwitchOS console port.

  • You can now set the speed of ports 21-28 of the FSR-124D model to 100 Mbps full-duplex (100full) and 100 MBps half-duplex (100half) to support the 100Base-FX module:
    config switch physical-port
    	edit port {port21-port28}
    		set speed {auto | 100full | 100half | 1000full | 1000auto}
    	next
    end
  • You can now change how long the FortiSwitch CPU usage must be higher than the specified threshold before an SNMP v3 notification (trap) is reported.
    config system snmp sysinfo
    	set trap-high-cpu-interval {1min | 10min | 30min | 1hr | 12hr | 24hr}
    end

Refer to the FortiSwitch feature matrix for details about the features supported by each FortiSwitch model.

Introduction

This document provides the following information for FortiSwitchOS 7.0.4 build 0071.

See the Fortinet Document Library for FortiSwitchOS documentation.

Supported models

FortiSwitchOS 7.0.4 supports the following models:

FortiSwitch 1xx FS-108E, FS-108E-POE, FS-108E-FPOE, FS-108F, FS-108F-POE, FS-108F-FPOE, FS-124E, FS-124E-POE, FS-124E-FPOE, FS-124F, FS-124F-POE, FS-124F-FPOE, FS-148E, FS-148E-POE, FS-148F, FS-148F-POE, FS-148F-FPOE
FortiSwitch 2xx FS-224D-FPOE, FS-224E, FS-224E-POE, FS-248D, FS-248E-POE, FS-248E-FPOE
FortiSwitch 4xx FS-424D, FS-424D-FPOE, FS-424D-POE, FS-424E, FS-424E-POE, FS-424E-FPOE, FS-424E-Fiber, FS-M426E-FPOE, FS-448D, FS-448D-FPOE, FS-448D-POE, FS-448E, FS-448E-POE, FS-448E-FPOE
FortiSwitch 5xx FS-524D-FPOE, FS-524D, FS-548D, FS-548D-FPOE
FortiSwitch 1xxx FS-1024D, FS-1024E, FS-1048D, FS-1048E, FS-T1024E
FortiSwitch 3xxx FS-3032D, FS-3032E
FortiSwitch Rugged FSR-112D-POE, FSR-124D

What’s new in FortiSwitchOS 7.0.4

Release 7.0.4 provides the following new features:

  • Administrators can now use the following commands to control whether users can log in with the FortiSwitchOS console port:
    config system console
    	set login {enable | disable}
    end			

    By default, users can log in with the FortiSwitchOS console port.

  • You can now set the speed of ports 21-28 of the FSR-124D model to 100 Mbps full-duplex (100full) and 100 MBps half-duplex (100half) to support the 100Base-FX module:
    config switch physical-port
    	edit port {port21-port28}
    		set speed {auto | 100full | 100half | 1000full | 1000auto}
    	next
    end
  • You can now change how long the FortiSwitch CPU usage must be higher than the specified threshold before an SNMP v3 notification (trap) is reported.
    config system snmp sysinfo
    	set trap-high-cpu-interval {1min | 10min | 30min | 1hr | 12hr | 24hr}
    end

Refer to the FortiSwitch feature matrix for details about the features supported by each FortiSwitch model.