Fortinet black logo

Devices Managed by FortiOS

Restricting the type of frames allowed through IEEE 802.1Q ports

Copy Link
Copy Doc ID 6c414491-4376-11ed-9d74-fa163e15d75b:801201
Download PDF

Restricting the type of frames allowed through IEEE 802.1Q ports

You can now specify whether each FortiSwitch port discards tagged 802.1Q frames or untagged 802.1Q frames or allows all frames access to the port. By default, all frames have access to each FortiSwitch port.

Use the following CLI commands:

config switch-controller managed-switch <SN>

config ports

edit <port_name>

set discard-mode <none | all-tagged | all-untagged>

next

next

end

Restricting the type of frames allowed through IEEE 802.1Q ports

You can now specify whether each FortiSwitch port discards tagged 802.1Q frames or untagged 802.1Q frames or allows all frames access to the port. By default, all frames have access to each FortiSwitch port.

Use the following CLI commands:

config switch-controller managed-switch <SN>

config ports

edit <port_name>

set discard-mode <none | all-tagged | all-untagged>

next

next

end