Test the SSL VPN in Web mode
The SSL-VPN users can verify that the SSL VPN works in web mode.
- Open a supported web browser.
- Connect to the SSLVPN web portal by entering the remote gateway's IP address and port number you specified when configuring the SSL-VPN settings.
- Enter the SSL-VPN user's username and password to authenticate and log in to the SSL-VPN web portal. A Login Request is sent to the end-user's mobile device.
- Open the SMS message on the end-user's mobile device, and tap Approve to complete the authentication. (Note: You must manually enter the token to authenticate instead if the push notification feature is not enabled.)
- Under Bookmarks, click the fgt isfw bookmark to connect to the FortiGate.
- Click the Quick Connection button to access the various services on the SSL-VPN Portal.
The following screen shot shows the SSL-VPN Web portal page when it opens.