Obtaining the deployment image

Go to the Fortinet support site (https://support.fortinet.com) and log in.
Navigate to Download > Firmware Images.
Select FortiWeb Manager from the Select Product drop-down list, then select the Download tab.
Navigate to the desired version, then download either of the following files beginning with "FWM_XENAWS":
- The ".out" file: Download it if you already deployed FortiWeb Manager-VM, and you want to upgrade it this time. Save this file to a local directory, log in to FortiWeb Manager, then upload this file through System Settings > Maintenance > Firmware Upgrade. You can skip the following steps in this article since they only apply to new installation of FortiWeb Manager.
- The ".out.xenaws.zip" file: Download it if you want to newly install FortiWeb Manager-VM.
Unzip the ".out.xenaws.zip" file. You will get two files: boot.disk and log.qcow2.

Go to the Fortinet support site (https://support.fortinet.com) and log in.

Navigate to Download > Firmware Images.

Select FortiWeb Manager from the Select Product drop-down list, then select the Download tab.

Navigate to the desired version, then download either of the following files beginning with "FWM_XENAWS":

The ".out" file: Download it if you already deployed FortiWeb Manager-VM, and you want to upgrade it this time. Save this file to a local directory, log in to FortiWeb Manager, then upload this file through System Settings > Maintenance > Firmware Upgrade. You can skip the following steps in this article since they only apply to new installation of FortiWeb Manager.
The ".out.xenaws.zip" file: Download it if you want to newly install FortiWeb Manager-VM.

Unzip the ".out.xenaws.zip" file. You will get two files: boot.disk and log.qcow2.