set interface
This command configures the network interfaces of FortiWeb Manager.
FortiWeb Manager supports the following interfaces by default. You can set the parameters for these ports.
Network Interface* | IPv4 Address/Netmask | IPv6 Address/Netmask |
---|---|---|
port1 | 192.168.1.99/24 | ::/0 |
port2 | 0.0.0.0/0 | ::/0 |
port3 | 0.0.0.0/0 | ::/0 |
port4 | 0.0.0.0/0 | ::/0 |
Syntax
set interface <port> {(ip | ip6) <IPADDRESS/LENGTH>|(addressing-mode | addressing6-mode)(manual | dhcp)}
Variable | Description |
<port> |
Select the physical network port of the FortiWeb Manager appliance. |
addressing-mode {manual | dhcp} |
Specify whether FortiWeb Manager acquires an IP address for this network interface manually or using DHCP to allow DHCP server to automatically assign IP address. |
<IPADDRESS/LENGTH> |
Type the IP address and subnet mask, separated by a forward
slash ( / ), such as 192.0.2.2/24 for an IPv4 address. |
Example
set interface port1 ip 10.200.111.98/24
set interface port1 addressing-mode dhcp