Fortinet black logo

Administration Guide

Debugging the packet processing flow

Debugging the packet processing flow

If you have determined that network traffic is not entering and leaving the FortiWeb appliance as expected, or not flowing through policies and scans as expected, you can debug the packet flow using the CLI.

For example, the following commands enable debug logs and the logs timestamp, and set other parameters for debug logging:

diagnose debug enable

diagnose debug console timestamp enable

diagnose debug application proxy 7

diagnose debug flow show module-process-detail

diagnose debug flow trace start

diagnose debug flow filter server-ip 192.0.2.20

Debugging the packet processing flow

If you have determined that network traffic is not entering and leaving the FortiWeb appliance as expected, or not flowing through policies and scans as expected, you can debug the packet flow using the CLI.

For example, the following commands enable debug logs and the logs timestamp, and set other parameters for debug logging:

diagnose debug enable

diagnose debug console timestamp enable

diagnose debug application proxy 7

diagnose debug flow show module-process-detail

diagnose debug flow trace start

diagnose debug flow filter server-ip 192.0.2.20