config system modem
|
This command is available for model(s): FortiGate 1000D, FortiGate 100D, FortiGate 100EF, FortiGate 100E, FortiGate 100F, FortiGate 101E, FortiGate 101F, FortiGate 1100E, FortiGate 1101E, FortiGate 1200D, FortiGate 140D-POE, FortiGate 140D, FortiGate 140E-POE, FortiGate 140E, FortiGate 1500DT, FortiGate 1500D, FortiGate 2000E, FortiGate 200E, FortiGate 201E, FortiGate 2200E, FortiGate 2201E, FortiGate 2500E, FortiGate 3000D, FortiGate 300D, FortiGate 300E, FortiGate 301E, FortiGate 30E 3G4G GBL, FortiGate 30E 3G4G INTL, FortiGate 30E 3G4G NAM, FortiGate 30E, FortiGate 3100D, FortiGate 3200D, FortiGate 3300E, FortiGate 3301E, FortiGate 3400E, FortiGate 3401E, FortiGate 3600E, FortiGate 3601E, FortiGate 3700D, FortiGate 3800D, FortiGate 3810D, FortiGate 3815D, FortiGate 3960E, FortiGate 3980E, FortiGate 400D, FortiGate 400E Bypass, FortiGate 400E, FortiGate 401E, FortiGate 40F 3G4G, FortiGate 40F, FortiGate 5001D, FortiGate 5001E1, FortiGate 5001E, FortiGate 500D, FortiGate 500E, FortiGate 501E, FortiGate 50E, FortiGate 51E, FortiGate 52E, FortiGate 600D, FortiGate 600E, FortiGate 601E, FortiGate 60E DSLJ, FortiGate 60E DSL, FortiGate 60E-POE, FortiGate 60E, FortiGate 60F, FortiGate 61E, FortiGate 61F, FortiGate 800D, FortiGate 80E-POE, FortiGate 80E, FortiGate 80F Bypass, FortiGate 80F-POE, FortiGate 80F, FortiGate 81E-POE, FortiGate 81E, FortiGate 81F-POE, FortiGate 81F, FortiGate 900D, FortiGate 90E, FortiGate 91E, FortiGate 92D, FortiGateRugged 30D, FortiGateRugged 60F 3G4G, FortiGateRugged 60F, FortiGateRugged 90D, FortiWiFi 30E 3G4G INTL, FortiWiFi 30E 3G4G NAM, FortiWiFi 30E, FortiWiFi 40F 3G4G, FortiWiFi 40F, FortiWiFi 50E 2R, FortiWiFi 50E, FortiWiFi 51E, FortiWiFi 60E DSLJ, FortiWiFi 60E DSL, FortiWiFi 60E, FortiWiFi 60F, FortiWiFi 61E, FortiWiFi 61F, FortiWiFi 80F 2R, FortiWiFi 81F 2R-POE, FortiWiFi 81F 2R. It is not available for: FortiGate VM64, FortiGateRugged 35D. |
Configure MODEM.
config system modem
Description: Configure MODEM.
set action [dial|stop|...]
set altmode [enable|disable]
set authtype1 {option1}, {option2}, ...
set authtype2 {option1}, {option2}, ...
set authtype3 {option1}, {option2}, ...
set auto-dial [enable|disable]
set connect-timeout {integer}
set dial-cmd1 {string}
set dial-cmd2 {string}
set dial-cmd3 {string}
set dial-on-demand [enable|disable]
set distance {integer}
set dont-send-CR1 [enable|disable]
set dont-send-CR2 [enable|disable]
set dont-send-CR3 [enable|disable]
set extra-init1 {string}
set extra-init2 {string}
set extra-init3 {string}
set holddown-timer {integer}
set idle-timer {integer}
set interface {string}
set lockdown-lac {string}
set mode [standalone|redundant]
set network-init {string}
set passwd1 {password}
set passwd2 {password}
set passwd3 {password}
set peer-modem1 [generic|actiontec|...]
set peer-modem2 [generic|actiontec|...]
set peer-modem3 [generic|actiontec|...]
set phone1 {string}
set phone2 {string}
set phone3 {string}
set pin-init {string}
set ppp-echo-request1 [enable|disable]
set ppp-echo-request2 [enable|disable]
set ppp-echo-request3 [enable|disable]
set priority {integer}
set redial [none|1|...]
set reset {integer}
set status [enable|disable]
set traffic-check [enable|disable]
set username1 {string}
set username2 {string}
set username3 {string}
set wireless-port {integer}
end
config system modem
|
Parameter |
Description |
Type |
Size |
|||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
action |
Dial up/stop MODEM. |
option |
- |
|||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
altmode |
Enable/disable altmode for installations using PPP in China. |
option |
- |
|||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
authtype1 |
Allowed authentication types for ISP 1. |
option |
- |
|||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
authtype2 |
Allowed authentication types for ISP 2. |
option |
- |
|||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
authtype3 |
Allowed authentication types for ISP 3. |
option |
- |
|||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
auto-dial |
Enable/disable auto-dial after a reboot or disconnection. |
option |
- |
|||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
connect-timeout |
Connection completion timeout. |
integer |
Minimum value: 30 Maximum value: 255 |
|||||||||||||||||||||||||
|
dial-cmd1 |
Dial command (this is often an ATD or ATDT command). |
string |
Maximum length: 63 |
|||||||||||||||||||||||||
|
dial-cmd2 |
Dial command (this is often an ATD or ATDT command). |
string |
Maximum length: 63 |
|||||||||||||||||||||||||
|
dial-cmd3 |
Dial command (this is often an ATD or ATDT command). |
string |
Maximum length: 63 |
|||||||||||||||||||||||||
|
dial-on-demand |
Enable/disable to dial the modem when packets are routed to the modem interface. |
option |
- |
|||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
distance |
Distance of learned routes. |
integer |
Minimum value: 1 Maximum value: 255 |
|||||||||||||||||||||||||
|
dont-send-CR1 |
Do not send CR when connected (ISP1). |
option |
- |
|||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
dont-send-CR2 |
Do not send CR when connected (ISP2). |
option |
- |
|||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
dont-send-CR3 |
Do not send CR when connected (ISP3). |
option |
- |
|||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
extra-init1 |
Extra initialization string to ISP 1. |
string |
Maximum length: 127 |
|||||||||||||||||||||||||
|
extra-init2 |
Extra initialization string to ISP 2. |
string |
Maximum length: 127 |
|||||||||||||||||||||||||
|
extra-init3 |
Extra initialization string to ISP 3. |
string |
Maximum length: 127 |
|||||||||||||||||||||||||
|
holddown-timer |
Hold down timer in seconds. |
integer |
Minimum value: 1 Maximum value: 60 |
|||||||||||||||||||||||||
|
idle-timer |
MODEM connection idle time. |
integer |
Minimum value: 1 Maximum value: 9999 |
|||||||||||||||||||||||||
|
interface |
Name of redundant interface. |
string |
Maximum length: 63 |
|||||||||||||||||||||||||
|
lockdown-lac |
Allow connection only to the specified Location Area Code (LAC). |
string |
Maximum length: 127 |
|||||||||||||||||||||||||
|
mode |
Set MODEM operation mode to redundant or standalone. |
option |
- |
|||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
network-init |
AT command to set the Network name/type (AT+COPS=<mode>,[<format>,<oper>[,<AcT>]]). |
string |
Maximum length: 127 |
|||||||||||||||||||||||||
|
passwd1 |
Password to access the specified dialup account. |
password |
Not Specified |
|||||||||||||||||||||||||
|
passwd2 |
Password to access the specified dialup account. |
password |
Not Specified |
|||||||||||||||||||||||||
|
passwd3 |
Password to access the specified dialup account. |
password |
Not Specified |
|||||||||||||||||||||||||
|
peer-modem1 |
Specify peer MODEM type for phone1. |
option |
- |
|||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
peer-modem2 |
Specify peer MODEM type for phone2. |
option |
- |
|||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
peer-modem3 |
Specify peer MODEM type for phone3. |
option |
- |
|||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
phone1 |
Phone number to connect to the dialup account (must not contain spaces, and should include standard special characters). |
string |
Maximum length: 63 |
|||||||||||||||||||||||||
|
phone2 |
Phone number to connect to the dialup account (must not contain spaces, and should include standard special characters). |
string |
Maximum length: 63 |
|||||||||||||||||||||||||
|
phone3 |
Phone number to connect to the dialup account (must not contain spaces, and should include standard special characters). |
string |
Maximum length: 63 |
|||||||||||||||||||||||||
|
pin-init |
AT command to set the PIN (AT+PIN=<pin>). |
string |
Maximum length: 127 |
|||||||||||||||||||||||||
|
ppp-echo-request1 |
Enable/disable PPP echo-request to ISP 1. |
option |
- |
|||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
ppp-echo-request2 |
Enable/disable PPP echo-request to ISP 2. |
option |
- |
|||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
ppp-echo-request3 |
Enable/disable PPP echo-request to ISP 3. |
option |
- |
|||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
priority |
Priority of learned routes. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
|||||||||||||||||||||||||
|
redial |
Redial limit. |
option |
- |
|||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
reset |
Number of dial attempts before resetting modem (0 = never reset). |
integer |
Minimum value: 0 Maximum value: 10 |
|||||||||||||||||||||||||
|
status |
Enable/disable Modem support (equivalent to bringing an interface up or down). |
option |
- |
|||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
traffic-check |
Enable/disable traffic-check. |
option |
- |
|||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
username1 |
User name to access the specified dialup account. |
string |
Maximum length: 63 |
|||||||||||||||||||||||||
|
username2 |
User name to access the specified dialup account. |
string |
Maximum length: 63 |
|||||||||||||||||||||||||
|
username3 |
User name to access the specified dialup account. |
string |
Maximum length: 63 |
|||||||||||||||||||||||||
|
wireless-port |
Enter wireless port number, 0 for default, 1 for first port, ... |
integer |
Minimum value: 0 Maximum value: 4294967295 |
|||||||||||||||||||||||||