Accessing the FortiADC GUI and CLI
After deploying the FortiADC-VM instance in Alibaba Cloud, you will need to access FortiADC to configure the instance.
You can access the FortiADC GUI and CLI using either of the following methods:
-
Remote access
-
Console access
To access the FortiADC GUI and CLI remotely:
- Navigate to Elastic Compute Service > Instances.
- Take note of the Instance ID/Name of your instance.
- Use the Internet IP to access the FortiADC via GUI/SSH/Telnet. The default login ID is admin and the password is the Instance ID/Name of your instance. After you login for the first time, you may change the password as needed.
To access the FortiADC GUI and CLI through the console:
- Navigate to Elastic Compute Service > Instances.
- For your instance, under the Actions column, click Connect.
- On the Connection and Command page, under the Workbench Connection, click Connect.
- In the Instance Login dialog:
- Enter the Username (the default login ID is admin), and select Password-based.
- Enter the Password (which is the Instance ID/Name by default).
- Click OK.