get router info6 bgp neighbors
Using this command to display BGP IPv6 neighbor information.
Syntax
get router info6 bgp neighbors
Example
FortiADC-VM (bgp) # get router info6 bgp neighbors
BGP neighbor is 2016::2, remote AS 101, local AS 101, internal link
BGP version 4, remote router ID 10.0.6.238
BGP state = Established, up for 00:14:57
Last read 00:00:57, hold time is 180, keepalive interval is 60 seconds
Configured hold time is 180, keepalive interval is 60 seconds
Neighbor capabilities:
4 Byte AS: advertised and received
Route refresh: advertised and received(old & new)
Address family IPv4 Unicast: advertised and received
Address family IPv6 Unicast: advertised and received
Message statistics:
Inq depth is 0
Outq depth is 0
Sent Rcvd
Opens: 14 1
Notifications: 0 2
Updates: 12 9
Keepalives: 20 17
Route Refresh: 0 0
Capability: 0 0
Total: 46 29
Minimum time between advertisement runs is 5 seconds
For address family: IPv4 Unicast
Community attribute sent to this neighbor(both)
3 accepted prefixes
For address family: IPv6 Unicast
Community attribute sent to this neighbor(both)
2 accepted prefixes
Connections established 3; dropped 2
Last reset 00:15:08, due to BGP Notification received
Local host: 2016::1, Local port: 179
Foreign host: 2016::2, Foreign port: 57424
Nexthop: 10.0.6.217
Nexthop global: 2016::1
Nexthop local: ::
BGP connection: shared network
Read thread: on Write thread: off
