Fortinet black logo

CLI Reference

config system alert

config system alert

Use this command to configure the alert (alert-name) that is referenced in config system alert-policy.

Before you begin:

You must have read-write permission for Security Fabric settings.

Syntax

Use the following command to create an event alert.

config system alert

edit <alert_name>

set alert-source-type event

set priority {high|low|middle}

set event <alert_event_name>

next

end

Use the following command to create an metric alert.

config system alert

edit <alert_name>

set alert-source-type metric

set metric-object-type slb-virtual-server

set metric-object-instance <virtual-server-name>

set duration 600

config alert-metric-expr-member

edit <alert-metric-expr-member_name>

set metric <metric_name>

set metric-comparator {le | eq | ge}

set value <int>

next

end

next

end

Please note that only one metric member is supported.

The <alert_event_name> is defined in config system alert-event, and the <metric_name> in config system alert-metric.

config system alert-event

edit <alert_event_name>

set alias <string>

set comments <string>

next

end

config system alert-metric

edit <metric_name>

set type {if | slb |sys}

set alias <string>

set comments <string>

next

end

The automation stitches CLI commands are recommended to use only for debug purpose. To configure the stitches through GUI, refer to "Chapter 23: Security Fabric" in FortiADC Handbook.

Related topics:

config system alert

config system alert

Use this command to configure the alert (alert-name) that is referenced in config system alert-policy.

Before you begin:

You must have read-write permission for Security Fabric settings.

Syntax

Use the following command to create an event alert.

config system alert

edit <alert_name>

set alert-source-type event

set priority {high|low|middle}

set event <alert_event_name>

next

end

Use the following command to create an metric alert.

config system alert

edit <alert_name>

set alert-source-type metric

set metric-object-type slb-virtual-server

set metric-object-instance <virtual-server-name>

set duration 600

config alert-metric-expr-member

edit <alert-metric-expr-member_name>

set metric <metric_name>

set metric-comparator {le | eq | ge}

set value <int>

next

end

next

end

Please note that only one metric member is supported.

The <alert_event_name> is defined in config system alert-event, and the <metric_name> in config system alert-metric.

config system alert-event

edit <alert_event_name>

set alias <string>

set comments <string>

next

end

config system alert-metric

edit <metric_name>

set type {if | slb |sys}

set alias <string>

set comments <string>

next

end

The automation stitches CLI commands are recommended to use only for debug purpose. To configure the stitches through GUI, refer to "Chapter 23: Security Fabric" in FortiADC Handbook.

Related topics: