This section lists known issues in FortiADC 7.0.3, but may not be a complete list. For inquiries about particular bugs, please contact Fortinet Customer Service & Support.
|0833592||FortiADC fails to send files to FortiSandBox Cloud.|
|0829597||HA A-A mode secondary unit traffic log shows gateway as none.|
In the GUI, failed to append child list when configuring Automation. This results when an alert type has reached the maximum entry capacity.
The current maximum is 256 entries for each alert type, as categorized in the backend CLI:
After figuring out which alert type has exceeded the 256 entry capacity from the backend CLI, remove any unused automation alerts from the GUI.
In an HA environment, if you are using a predefined automation configuration, resetting the configuration through the GUI (using the reset button) or unsetting comments through CLI will cause the HA synchronization to fail whenever a device reboots and rejoins the cluster.
Using the GUI reset button resets the predefined configuration values to the predefined default values, all except the comments value which is set to the default value on the backend. For example, if using the HA predefined configuration, the reset will result in
In the CLI, if
In the CLI, edit