Fortinet black logo

CLI Reference

config endpoint-control client

config endpoint-control client

This configuration is automatically created after the FortiClient endpoint information is synchronized to FortiADC from FortiClient EMS.

This is a hidden command. As the records are automatically generated, editing is not recommended. For debug information for FortiClient endpoints registered to FortiClient EMS, use diagnose endpoint-control client list.

In certain scenarios, you may need to delete a FortiClient endpoint record. For example, when you delete a FortiClient EMS connector from FortiADC and a ZTNA Profile is still using the ZTNA tag that has been synchronized from this FortiClient EMS connector, FortiADC would not delete the related endpoint-control client configuration. In this case, you can delete the ZTNA client record through CLI config endpoint-control client or use the purge command to delete the entire table.

Syntax

config endpoint-control client

edit <FCT uid>

set src-ip <IP>

set src-mac <MAC>

set info <EMS>

config tags

edit <tag>

next

end

next

end

Example

config endpoint-control client

edit "BEEC13BAF89C4EC5BEF1D6DC53012465"

set src-ip 3858983434

set vfid 4294967295

set src-mac 00:50:56:81:63:ea

set info FCTEMS8822003242

config tags

edit "FCTEMS8822003242_Low"

next

end

next …

purge

ADC(client) # purge

This operation will clear all table!

Do you want to continue? (y/n)y

config endpoint-control client

config endpoint-control client

This configuration is automatically created after the FortiClient endpoint information is synchronized to FortiADC from FortiClient EMS.

This is a hidden command. As the records are automatically generated, editing is not recommended. For debug information for FortiClient endpoints registered to FortiClient EMS, use diagnose endpoint-control client list.

In certain scenarios, you may need to delete a FortiClient endpoint record. For example, when you delete a FortiClient EMS connector from FortiADC and a ZTNA Profile is still using the ZTNA tag that has been synchronized from this FortiClient EMS connector, FortiADC would not delete the related endpoint-control client configuration. In this case, you can delete the ZTNA client record through CLI config endpoint-control client or use the purge command to delete the entire table.

Syntax

config endpoint-control client

edit <FCT uid>

set src-ip <IP>

set src-mac <MAC>

set info <EMS>

config tags

edit <tag>

next

end

next

end

Example

config endpoint-control client

edit "BEEC13BAF89C4EC5BEF1D6DC53012465"

set src-ip 3858983434

set vfid 4294967295

set src-mac 00:50:56:81:63:ea

set info FCTEMS8822003242

config tags

edit "FCTEMS8822003242_Low"

next

end

next …

purge

ADC(client) # purge

This operation will clear all table!

Do you want to continue? (y/n)y