execute 40G-fan-out-config

Use this command to configure a 40G fanout, allowing 40G ports to be split into four 10G ports. FortiADC supports two operating modes for 40G NICs: 2x40G (default) and 4x10G. In 4x10G mode, the 40G ports are split into four 10G ports to enable fanout functionality.

This is available only on FortiADC 4200F and 5000F models.

Syntax

execute 40G-fan-out-config

Example

FortiADC-4200F # execute 40G-fan-out-config
status
NIC     Mode    ports
NIC1    2x40    port10 port9
NIC2    2x40    port12 port11 vsport-3F8E58E E58E
This operation change 40G NIC config and reboot system!
Do you want to continue? (y/n)y
NIC1 40G fan out (current: disable, 2x40)
(enable/disable)enable
NIC2 40G fan out (current: disable, 2x40)
(enable/disable)enable
your config:
NIC1: 4x10
NIC2: 4x10
Do you want save config for 40G NICs
(y/n)y
change config and reboot
 
System is rebooting...

After enabling fanout for both NICs:

FortiADC-4200F # execute 40G-fan-out-config
status
NIC     Mode    ports
NIC1    4x10    port9-2 port9-1 port9-3 port9-4
NIC2    4x10    port11-2 port11-1 port11-3 port11-4
This operation change 40G NIC config and reboot system!
Do you want to continue? (y/n)