get router info6 ospf6 interface
Use this command to retrieve information about OSPFv3 interfaces.
Syntax
get router info6 ospf6 interface
Example
FortiADC1 # get router info6 ospf6 interface
bond0 is down, type BROADCAST
Interface ID: 3
OSPF not enabled on this interface
erspan0 is down, type BROADCAST
Interface ID: 9
OSPF not enabled on this interface
gre0 is down, type UNKNOWN
Interface ID: 7
OSPF not enabled on this interface
gretap0 is down, type BROADCAST
Interface ID: 8
OSPF not enabled on this interface
haport0 is up, type BROADCAST
Interface ID: 12
OSPF not enabled on this interface
imq0 is down, type UNKNOWN
Interface ID: 2
OSPF not enabled on this interface
lo is up, type LOOPBACK
Interface ID: 1
OSPF not enabled on this interface
port1 is up, type BROADCAST
Interface ID: 4
OSPF not enabled on this interface
port2 is up, type BROADCAST
Interface ID: 5
OSPF not enabled on this interface
port3 is up, type BROADCAST
Interface ID: 6
Internet Address:
inet6: fe80::f816:3eff:febe:38d6/64
inet6: 2000:200::2a6/64
Instance ID 0, Interface MTU 1500 (autodetect: 1500)
MTU mismatch detection: enabled
Area ID 1.1.1.1, Cost 10
State BDR, Transmit Delay 1 sec, Priority 1
Timer intervals configured:
Hello 10, Dead 40, Retransmit 5
DR: 0.0.0.2 BDR: 0.0.0.1
Number of I/F scoped LSAs is 2
0 Pending LSAs for LSUpdate in Time 00:00:00 [thread off]
0 Pending LSAs for LSAck in Time 00:00:00 [thread off]
sit0 is down, type UNKNOWN
Interface ID: 10
OSPF not enabled on this interface
vtb0 is down, type POINTOPOINT
Interface ID: 11
OSPF not enabled on this interface