diagnose debug pool-member-debug

Use this command to set the filter to view health check debug information for specific real servers by applying filtering at the VDOM, pool, and real server levels.

After applying these filters, you can then enable debug in the health check module to view the applicable debug information for the specified real server(s). For details, see diagnose debug module.

Syntax

diagnose debug pool-member-debug add vdom <vdom> pool <pool_name> member <id>

diagnose debug pool-member-debug list

diagnose debug pool-member-debug clear

add	Add entries to specify the real servers you want to view the debug information of by providing the following information: vdom <vdom> — You are required to specify the VDOM. If only the VDOM is specified, then each real server under this VDOM will be added as an entry. pool <pool_name> — Specify the name of the real server pool. This real server pool must exist in the specified VDOM. member <id> — Specify the ID of the real server pool member within the specified real server pool. This real server pool must exist in the specified VDOM.
list	Lists all the added entries.
clear	Clears all entries. This will revert the health check debug to print messages for all real servers.

Example

FortiADC-VM #diagnose debug pool-member-debug add vdom test

FortiADC-VM #diagnose debug pool-member-debug list
Pool member debug is enabled.
3 entries
vdom:test, pool:RSP3, member:1
vdom:test, pool:RSP2, member:1
vdom:test, pool:RSP2, member:2

FortiADC-VM #diagnose debug pool-member-debug add vdom test pool RSP2

FortiADC-VM #diagnose debug pool-member-debug list
Pool member debug is enabled.
2 entries
vdom:test, pool:RSP2, member:1
vdom:test, pool:RSP2, member:2

FortiADC-VM #diagnose debug pool-member-debug add vdom test pool RSP2 member 2

FortiADC-VM #diagnose debug pool-member-debug list
Pool member debug is enabled.
1 entries
vdom:test, pool:RSP2, member:2