Connecting to the GUI

Once the network is configured, FortiAnalyzer-BigData GUI can be accessed through the specified Management IP address.

Log in with the username admin and no password.

To set up the system via the FortiAnalyzer-BigData Setup wizard:

1. Configure basic and network settings.

   • Modify the time zone, or use the default value.

   • Modify the NTP server, or use default value.

   • Modify the primary and secondary DNS server, or use default value.

   • Modify or add the IP, netmask, and default gateway for main host network.

   • Modify or add the IP, netmask, and default gateway for management network.

   

2. Click Next.

3. Apply the recommended configurations.

   • In this step, the system automatically adjusts the optimized configurations to adapt to the underlying hardware spec.

   

4. Click Setup to begin the initial setup process.

   • The system will perform the necessary setup steps and start all services. After it is complete, you can log into the portal. See below.