Connect to the FortiAnalyzer-BigData CLI

Once you configure the FortiAnalyzer-BigData network, you can use the IP addresses to access the FortiAnalyzer-BigData Main CLI or the cluster controller and manage the system.

To connect to the FortiAnalyzer-BigData Main CLI:

1. Establish an SSH connection to the Main host IP you configured during initial setup.
2. Log in using the administrator credentials you created previously.
   If you did not create a new administrator credential during initial setup, use the default credentials of username admin with no password.

To connect to the cluster controller CLI:

1. Establish an SSH connection to the management IP you configured during initial setup.
2. Log in using the default username root and password fortinet@123.
3. Once you establish a connection, you can use the fazbdctl CLI commands to manage the cluster. For more information, see FortiAnalyzer-BigData cluster controller CLI.

   Fortinet strongly recommends that you update the password with the passwd command.