Fortinet black logo

CLI Reference

route6

route6

Use this command to view or configure static IPv6 routing table entries on your FortiAnalyzer unit.

Syntax

config system route6

edit <seq_int>

set device <string>

set dst <ipv6_prefix>

set gateway <ipv6_address>

end

Variable

Description

<seq_int>

Enter an unused routing sequence number to create a new route. Enter an existing route number to edit that route.

device <string>

Enter the port (interface) used for this route.

dst <ipv6_prefix>

Enter the IPv4 address and mask for the destination network.

gateway <ipv6_address>

Enter the default gateway IPv6 address for this network.

Use the show command to display the current configuration if it has been changed from its default value:

show system route6

route6

Use this command to view or configure static IPv6 routing table entries on your FortiAnalyzer unit.

Syntax

config system route6

edit <seq_int>

set device <string>

set dst <ipv6_prefix>

set gateway <ipv6_address>

end

Variable

Description

<seq_int>

Enter an unused routing sequence number to create a new route. Enter an existing route number to edit that route.

device <string>

Enter the port (interface) used for this route.

dst <ipv6_prefix>

Enter the IPv4 address and mask for the destination network.

gateway <ipv6_address>

Enter the default gateway IPv6 address for this network.

Use the show command to display the current configuration if it has been changed from its default value:

show system route6