Fortinet black logo

CLI Reference

fct-services

fct-services

Use this command to configure the built-in FDS to provide FortiGuard services to FortiClient installations.

Syntax

config fmupdate fct-services

set status {enable | disable}

set port <port_int>

end

Variables

Description

status {enable | disable}

Enable/disable built-in FDS service to FortiClient installations (default = enable).

port <port_int>

Enter the port number on which the built-in FDS should provide updates to FortiClient installations (1 - 65535, default = 80).

Example

You could configure the built-in FDS to accommodate older versions of FortiClient installations by providing service on their required port.

config fmupdate fct-services

set status enable

set port 80

end

fct-services

Use this command to configure the built-in FDS to provide FortiGuard services to FortiClient installations.

Syntax

config fmupdate fct-services

set status {enable | disable}

set port <port_int>

end

Variables

Description

status {enable | disable}

Enable/disable built-in FDS service to FortiClient installations (default = enable).

port <port_int>

Enter the port number on which the built-in FDS should provide updates to FortiClient installations (1 - 65535, default = 80).

Example

You could configure the built-in FDS to accommodate older versions of FortiClient installations by providing service on their required port.

config fmupdate fct-services

set status enable

set port 80

end