central-management
Use this command to set or check the settings for central management.
Syntax
config system central-management
set type {fortimanager}
set allow-monitor {enable | disable}
set authorized-manager-only {enable | disable}
set serial-number <serial_number_string>
set fmg <string>
set enc-alogorithm {default | high | low}
end
type {fortimanager}
|
Type of management server (default = fortimanager).
|
allow-monitor {enable | disable}
|
Enable/disable remote monitoring of the device (default = enable).
|
authorized-manager-only {enable | disable}
|
Enable/disable restricted to authorize manager only setting (default = enable).
|
serial-number <serial_number_string>
|
Set the device serial number. You can enter up to 5 serial numbers.
|
fmg <string>
|
Set the IP address or FQDN of the FortiManager (character limit = 31).
|
enc-alogorithm {default | high | low}
|
Set the SSL communication encryption algorithms:
-
default : SSL communication with high and medium encryption algorithms (default)
-
high : SSL communication with high encryption algorithms
-
low : SSL communication with low encryption algorithms
|
Use the show command to display the current configuration if it has been changed from its default value:
show system central-management