Use the Edit Device page to edit information about a device. The information and options available on the Edit Device page depend on the device type, firmware version, and which features are enabled.
- Go to Device Manager and click the Devices Total tab in the quick status bar.
- In the content pane, select the device or model device and click Edit, or right-click on the device and select Edit. The Edit Device pane displays.
- Edit the device settings as required.
The name of the device.
Descriptive information about the device.
Enter the IP address of the device.
The serial number of the device.
The firmware version.
Enter the administrator user name.
Enter the administrator user password.
Select to identify the device as part of an HA cluster, and to identify the other device in the cluster by selecting them from the drop-down list, or by inputting their serial numbers.
Identifies the latitude and longitude of the device location to support the interactive maps.
Click Show Map to open a map showing the location of the device based on the coordinates. Click and drag the map marker to adjust the device's location.
Optionally, enter the company or organization information.
Optionally, enter the country where the device is located.
Optionally, enter the province or state.
Optionally, enter the city.
Optionally, enter the contact information.
- After making the appropriate changes click OK.