This section highlights some of the operational changes that administrators should be aware of in FortiAnalyzer version 6.2.2.
FortiAnalyzer 6.2.1 introduced ADOM limit changes for FAZ-VMs. ADOMS created prior to upgrade are unaffected by the new limit. For more details, see Appendix A - Maximum number of ADOMs supported.
FortiAnalyzer hardware devices display a warning when the maximum number of ADOMs is reached or exceeded. The platform does not enforce the limit; however, adding more ADOMs may affect the performance of the device.
Port 8443 is reserved for https-logging from FortiClient EMS for Chromebooks.
Prior to upgrading to FortiAnalyzer 6.2, make sure that all FortiGate devices are configured to use encryption when communicating with FortiAnalyzer. Starting with FortiAnalyzer 6.2.0, all OFTP communications must be encrypted.
A Hyper-V FAZ-VM running on a PC with an AMD CPU may experience a kernel panic. Fortinet recommends running VMs on an Intel-based PC.
Due to known vulnerabilities in the SSLv3 protocol, FortiAnalyzer-VM64-AWS only enables TLSv1 by default. All other models enable both TLSv1 and SSLv3. If you wish to disable SSLv3 support, please run:
config system global
set ssl-protocol t1sv1
Logs with the following conditions met are considered usable for the calculation of estimated browsing time:
Traffic logs with
logid == 13,
hostname must not be empty. The
service field should be either
If all above conditions are met, then
user is empty) are combined as a key to identify a user. For time estimation, the current value of
duration is calculated against history session start and end time, only un-overlapped part are used as the
ebtime of the current log.