Fortinet black logo

CLI Reference

Home FortiAnalyzer 7.0.12 CLI Reference
7.0.12
7.4.2
7.4.1
7.4.0
7.2.5
7.2.4
7.2.3
7.2.2
7.2.1
7.2.0
7.0.12
7.0.11
7.0.10
7.0.9
7.0.8
7.0.7
7.0.6
7.0.5
7.0.4
7.0.3
7.0.2
7.0.1
7.0.0
6.4.14
6.4.13
6.4.12
6.4.11
6.4.10
6.4.9
6.4.8
6.4.7
6.4.6
6.4.5
6.4.4
6.4.3
6.4.2
6.4.1
6.4.0
6.2.12
6.2.11
6.2.10
6.2.9
6.2.8
6.2.7
6.2.6
6.2.5
6.2.3
6.2.2
6.2.1
6.2.0
6.0.12
6.0.11
6.0.10
6.0.9
6.0.8
6.0.7
6.0.6
6.0.5
6.0.4
6.0.3
6.0.2
6.0.1
6.0.0
5.6.11
5.6.10
5.6.9
5.6.8
5.6.8
5.6.7
5.6.7
5.6.6
5.6.6
5.6.5
5.6.5
5.6.4
5.6.4
5.6.3
5.6.3
5.6.2
5.6.2
5.6.1
5.6.1
5.6.0
5.6.0
5.4.7
5.4.6
5.4.5
5.4.5
5.4.4
5.4.4
5.4.3
5.4.3
5.4.2
5.4.2
5.4.1
5.4.1
5.4.0
5.4.0
5.2.10
5.2.9
5.2.9
5.2.7
5.2.7
5.2.6
5.2.6
5.2.5
5.2.5
5.2.4
5.2.4
5.2.3
5.2.3
5.2.2
5.2.1
5.2.0
5.0.13
5.0.13
5.0.11
5.0.11
5.0.10
5.0.9
5.0.8
5.0.7
5.0.6
5.0.5
5.0.4
5.0.3
5.0.2
5.0.1
4.3.0
4.2.0
4.1.0
4.0.0

interface

interface

Use this command to edit the configuration of a FortiAnalyzer network interface.

Syntax

To configure a physical interface:

config system interface

edit <interface name>

set status {enable | disable}

set ip <ipv4_mask>

set allowaccess {fgfm http https https-logging ping snmp soc-fabric ssh webservice}

set lldp {enable | disable}

set speed {1000full | 100full | 100half | 10full | 10half | auto}

set description <string>

set alias <string>

set mtu <integer>

set type {aggregate | physical}

set camera-discovery {enable | disable}

config ipv6

set ip6-address <ipv6 prefix>

set ip6-allowaccess {fgfm http https https-logging ping snmp ssh webservice}

set ip6-autoconf {enable | disable}

end

end

To configure an aggregate interface:

config system interface

edit <interface name>

set status {enable | disable}

set ip <ipv4_mask>

set allowaccess {fgfm http https https-logging ping snmp soc-fabric ssh webservice}

set speed {1000full | 100full | 100half | 10full | 10half | auto}

set description <string>

set alias <string>

set mtu <integer>

set type {aggregate | physical}

set lacp-speed {fast | slow}

set min-links <integer>

set min-links-down {administrative | operational}

set link-up-delay <integer>

set camera-discovery {enable | disable}

config member

edit <interface-name>

end

config ipv6

set ip6-address <ipv6 prefix>

set ip6-allowaccess {fgfm http https https-logging ping snmp ssh webservice}

set ip6-autoconf {enable | disable}

end

end

Variable

Description

<interface name>

The interface name.

The port can be set to a port number such as port1, port2, port3, or port4. Different FortiAnalyzer models have different numbers of ports.

status {enable | disable}

Enable/disable the interface (default = enable). If the interface is disabled it does not accept or send packets. If you disable a physical interface, VLAN interfaces associated with it are also disabled.

ip <ipv4_mask>

Enter the interface IPv4 address and netmask. The IPv4 address cannot be on the same subnet as any other interface.

allowaccess {fgfm http https https-logging ping snmp soc-fabric ssh webservice}

Enter the types of management access permitted on this interface. Separate multiple selected types with spaces.

If you want to add or remove an option from the list, retype the list as required.

lldp {enable | disable}

Enable or disable the link layer discovery protocol (LLDP) (default = disable).

This variable is only available when the type is physical.

speed {1000full | 100full | 100half | 10full | 10half | auto}

Enter the speed and duplexing the network port uses:

  • 100full: 100M full-duplex
  • 100half: 100M half-duplex
  • 10full: 10M full-duplex
  • 10half: 10M half-duplex
  • auto: Automatically negotiate the fastest common speed (default)

description <string>

Enter a description of the interface (character limit = 63).

alias <string>

Enter an alias for the interface.

mtu <integer>

Set the maximum transportation unit (68 - 9000, default = 1500).

type {aggregate | physical}

Set the type of interface (default = aggregate).

lacp-speed {fast | slow}

Set how often the interface sends LACP messages:

  • fast: Send LACP message every second.

  • slow: Send LACP message every 30 seconds (default).

This variable is only available when the type is aggregate.

min-links <integer>

Set the minimum number of aggregated ports that must be up (default = 1).

This variable is only available when the type is aggregate.

min-links-down {administrative | operational}

Action to take when less than the configured minimum number of links are active:

  • administrative: Set the aggregate administratively down.

  • operational: Set the aggregate operationally down (default).

This variable is only available when the type is aggregate.

link-up-delay <integer>

Set the number of milliseconds to wait before considering a link is up (default = 50).

This variable is only available when the type is aggregate.

camera-discovery {enable | disable}

Enable/disable camera discovery (default = enable).

This option is only available on hardware devices that support FortiRecorder.

Variables for config member subcommand:

This subcommand is only available when the type is aggregate.

<interface-name>

Enter the interface name that belongs to the aggregate or the redundant interface.

Variables for config ipv6 subcommand:

ip6-address <ipv6 prefix>

IPv6 address/prefix of interface.

ip6-allowaccess {fgfm http https https-logging ping snmp ssh webservice}

Allow management access to the interface.

ip6-autoconf {enable | disable}

Enable/disable address automatic configuration (SLAAC) (default = enable).

Example

This example shows how to set the FortiAnalyzer port1 interface IPv4 address and network mask to 192.168.100.159 and 255.255.255.0, and the management access to ping, https, and ssh.

config system interface

edit port1

set allowaccess ping https ssh

set ip 192.168.110.26 255.255.255.0

set status enable

end

Previous
Next

interface

Use this command to edit the configuration of a FortiAnalyzer network interface.

Syntax

To configure a physical interface:

config system interface

edit <interface name>

set status {enable | disable}

set ip <ipv4_mask>

set allowaccess {fgfm http https https-logging ping snmp soc-fabric ssh webservice}

set lldp {enable | disable}

set speed {1000full | 100full | 100half | 10full | 10half | auto}

set description <string>

set alias <string>

set mtu <integer>

set type {aggregate | physical}

set camera-discovery {enable | disable}

config ipv6

set ip6-address <ipv6 prefix>

set ip6-allowaccess {fgfm http https https-logging ping snmp ssh webservice}

set ip6-autoconf {enable | disable}

end

end

To configure an aggregate interface:

config system interface

edit <interface name>

set status {enable | disable}

set ip <ipv4_mask>

set allowaccess {fgfm http https https-logging ping snmp soc-fabric ssh webservice}

set speed {1000full | 100full | 100half | 10full | 10half | auto}

set description <string>

set alias <string>

set mtu <integer>

set type {aggregate | physical}

set lacp-speed {fast | slow}

set min-links <integer>

set min-links-down {administrative | operational}

set link-up-delay <integer>

set camera-discovery {enable | disable}

config member

edit <interface-name>

end

config ipv6

set ip6-address <ipv6 prefix>

set ip6-allowaccess {fgfm http https https-logging ping snmp ssh webservice}

set ip6-autoconf {enable | disable}

end

end

Variable

Description

<interface name>

The interface name.

The port can be set to a port number such as port1, port2, port3, or port4. Different FortiAnalyzer models have different numbers of ports.

status {enable | disable}

Enable/disable the interface (default = enable). If the interface is disabled it does not accept or send packets. If you disable a physical interface, VLAN interfaces associated with it are also disabled.

ip <ipv4_mask>

Enter the interface IPv4 address and netmask. The IPv4 address cannot be on the same subnet as any other interface.

allowaccess {fgfm http https https-logging ping snmp soc-fabric ssh webservice}

Enter the types of management access permitted on this interface. Separate multiple selected types with spaces.

If you want to add or remove an option from the list, retype the list as required.

lldp {enable | disable}

Enable or disable the link layer discovery protocol (LLDP) (default = disable).

This variable is only available when the type is physical.

speed {1000full | 100full | 100half | 10full | 10half | auto}

Enter the speed and duplexing the network port uses:

  • 100full: 100M full-duplex
  • 100half: 100M half-duplex
  • 10full: 10M full-duplex
  • 10half: 10M half-duplex
  • auto: Automatically negotiate the fastest common speed (default)

description <string>

Enter a description of the interface (character limit = 63).

alias <string>

Enter an alias for the interface.

mtu <integer>

Set the maximum transportation unit (68 - 9000, default = 1500).

type {aggregate | physical}

Set the type of interface (default = aggregate).

lacp-speed {fast | slow}

Set how often the interface sends LACP messages:

  • fast: Send LACP message every second.

  • slow: Send LACP message every 30 seconds (default).

This variable is only available when the type is aggregate.

min-links <integer>

Set the minimum number of aggregated ports that must be up (default = 1).

This variable is only available when the type is aggregate.

min-links-down {administrative | operational}

Action to take when less than the configured minimum number of links are active:

  • administrative: Set the aggregate administratively down.

  • operational: Set the aggregate operationally down (default).

This variable is only available when the type is aggregate.

link-up-delay <integer>

Set the number of milliseconds to wait before considering a link is up (default = 50).

This variable is only available when the type is aggregate.

camera-discovery {enable | disable}

Enable/disable camera discovery (default = enable).

This option is only available on hardware devices that support FortiRecorder.

Variables for config member subcommand:

This subcommand is only available when the type is aggregate.

<interface-name>

Enter the interface name that belongs to the aggregate or the redundant interface.

Variables for config ipv6 subcommand:

ip6-address <ipv6 prefix>

IPv6 address/prefix of interface.

ip6-allowaccess {fgfm http https https-logging ping snmp ssh webservice}

Allow management access to the interface.

ip6-autoconf {enable | disable}

Enable/disable address automatic configuration (SLAAC) (default = enable).

Example

This example shows how to set the FortiAnalyzer port1 interface IPv4 address and network mask to 192.168.100.159 and 255.255.255.0, and the management access to ping, https, and ssh.

config system interface

edit port1

set allowaccess ping https ssh

set ip 192.168.110.26 255.255.255.0

set status enable

end

Previous
Next