Registered Device Logs

Enter the log file size, from 10 to 500MB. Default: 200MB.

Select to roll logs daily or weekly.

• Daily: select the hour and minute value in the dropdown lists.
• Weekly: select the day, hour, and minute value in the dropdown lists.

Select to upload logs and configure the following settings.

Select one of FTP, SFTP, or SCP.

Enter the IP address of the upload server.

Enter the username used to connect to the upload server.

Enter the password used to connect to the upload server.

Enter the remote directory on the upload server where the log will be uploaded.

Select to upload log files when they are rolled according to settings selected under Roll Logs, or daily at a specific hour.

Select to gzip the logs before uploading. This will result in smaller logs and faster upload times.

Select to remove device log files from the FortiAnalyzer system after they have been uploaded to the Upload Server.

Local Device Log

Select to send local event logs to another FortiAnalyzer or FortiManager device.

Enter the IP address of the FortiAnalyzer or FortiManager.

Select to upload logs in real time or at a scheduled time.

When selecting a scheduled time, you can specify the hour and minute to upload logs each day.

Select the minimum log severity level from the dropdown list. This option is only available when Upload Option is Realtime.

Select to use reliable log transmission.