SNMP agent
The SNMP agent sends SNMP traps originating on the FortiAnalyzer system to an external monitoring SNMP manager defined in a SNMP community. Typically an SNMP manager is an application on a local computer that can read the SNMP traps and generate reports or graphs from them.
The SNMP manager can monitor the FortiAnalyzer system to determine if it is operating properly, or if there are any critical events occurring. The description, location, and contact information for this FortiAnalyzer system will be part of the information an SNMP manager will have — this information is useful if the SNMP manager is monitoring many devices, and it will enable faster responses when the FortiAnalyzer system requires attention.
Go to System Settings > Network and scroll to the SNMP section to configure the SNMP agent.
The following information and options are available:
|
SNMP Agent |
Select to enable the SNMP agent. When this is enabled, it sends FortiAnalyzer SNMP traps. |
|
|
|
Description |
Optionally, type a description of this FortiAnalyzer system to help uniquely identify this unit. |
|
|
Location |
Optionally, type the location of this FortiAnalyzer system to help find it in the event it requires attention. |
|
|
Contact |
Optionally, type the contact information for the person in charge of this FortiAnalyzer system. |
|
SNMP v1/2c |
The list of SNMP v1/v2c communities added to the FortiAnalyzer configuration. |
|
|
|
Create New |
Select Create New to add a new SNMP community. If SNMP agent is not selected, this control will not be visible. For more information, see SNMP v1/v2c communities. |
|
|
Edit |
Edit the selected SNMP community. |
|
|
Delete |
Delete the selected SNMP community or communities. |
|
|
Community Name |
The name of the SNMP community. |
|
|
Queries |
The status of SNMP queries for each SNMP community. The enabled icon indicates that at least one query is enabled. The disabled icon indicates that all queries are disabled. |
|
|
Traps |
The status of SNMP traps for each SNMP community. The enabled icon indicates that at least one trap is enabled. The disabled icon indicates that all traps are disabled. |
|
|
Enable |
Enable or disable the SNMP community. |
|
SNMP v3 |
The list of SNMPv3 users added to the configuration. |
|
|
|
Create New |
Select Create New to add a new SNMP user. If SNMP agent is not selected, this control will not be visible. For more information, see SNMP v3 users. |
|
|
Edit |
Edit the selected SNMP user. |
|
|
Delete |
Delete the selected SNMP user or users. |
|
|
User Name |
The user name for the SNMPv3 user. |
|
|
Security Level |
The security level assigned to the SNMPv3 user. |
|
|
Notification Hosts |
The notification host or hosts assigned to the SNMPv3 user. |
|
|
Queries |
The status of SNMP queries for each SNMP user. The enabled icon indicates queries are enabled. The disabled icon indicates they are disabled. |