system interface

Use these commands to view interface configuration and status.

Syntax

get system interface

get system interface [interface name]

Examples

This example shows the output for get system interface:

== [ port1 ]
name: port1    status: enable    mode: static    ip: 111.11.11.11 255.255.255.0   speed: auto
== [ port2 ]
name: port2    status: enable    mode: static    ip: 0.0.0.0 0.0.0.0   speed: auto
== [ port3 ]
name: port3    status: enable    mode: static    ip: 0.0.0.0 0.0.0.0   speed: auto
== [ port4 ]
name: port4    status: enable    mode: static    ip: 0.0.0.0 0.0.0.0   speed: auto
== [ port5 ]
name: port5    status: enable    mode: static    ip: 0.0.0.0 0.0.0.0   speed: auto
== [ port6 ]
name: port6    status: enable    mode: static    ip: 0.0.0.0 0.0.0.0   speed: auto
== [ port7 ]
name: port7    status: enable    mode: static    ip: 0.0.0.0 0.0.0.0   speed: auto
== [ port8 ]
name: port8    status: enable    mode: static    ip: 0.0.0.0 0.0.0.0   speed: auto
== [ port9 ]
name: port9    status: enable    mode: static    ip: 0.0.0.0 0.0.0.0   speed: auto
== [ port10 ]
name: port10    status: enable    mode: static    ip: 0.0.0.0 0.0.0.0   speed: auto
== [ port11 ]
name: port11    status: enable    mode: static    ip: 0.0.0.0 0.0.0.0   speed: auto
== [ port12 ]
name: port12    status: enable    mode: static    ip: 0.0.0.0 0.0.0.0   speed: auto

This example shows the output for get system interface port1:

name                : port1
status              : enable
mode                : static
ip                  : 111.11.11.11 255.255.255.0
allowaccess         : https ssh
lldp-reception      : disable
lldp-transmission   : disable
speed               : auto
description         : (null)
alias               : (null)
mtu                 : 1500
type                : physical
ipv6:
    ip6-address: ::/0           ip6-allowaccess:            ip6-autoconf: enable