New features or enhancements
The following table includes FortiAP version 7.2.3 new features and enhancements:
|
Bug ID |
Description |
Supported FortiOS Versions |
|---|---|---|
|
868839 |
The wtp-profile of FAP-432F and 433F models can set external antenna parameters when the corresponding external antenna is installed. |
7.2.5 and later |
|
887980 |
Support
a new data-channel security option " The FortiAP serial number is added to the initial IPsec setup message so that it can be used by a dispatcher to query the destination FortiGate. Then the FortiAP will connect to the FortiGate and encrypt the data channel with an IPsec-VPN tunnel. |
7.4.0 and later |
|
902191 |
Wireless bonjour-profile feature supports a new service option for Miracast. |
7.4.0 and later |
|
920073 |
Configure channel-bonding bandwidth for site survey SSID. New CLI variables are added for 2.4GHz and 5GHz bandwidth respectively: SURVEY_CW_24 = 0(20MHz) | 1(40MHz) SURVEY_CW_50 = 0(20MHz) | 1(40MHz) | 2(80MHz) | 3(160MHz) |
Feature only in FortiAP |
|
931158 |
CAPWAP Auto Health Check feature. FortiAP periodically checks the real-time status of CAPWAP connections to the AP controllers. In
the FortiAP CLI, enter For
additional diagnosis, use |
Feature only in FortiAP |
Region/country code update and DFS certification
|
Bug ID |
Description |
Supported FortiOS Versions |
|---|---|---|
|
601676 |
Enable 5GHz UNII-1 and UNII-2 channels and adjust transmit power for region code "F" (Indonesia). |
Update only in FortiAP |
| 876673 | Enable 5GHz UNII-3 channels in certain European countries. |
7.4.0 and later |
| 913393 | Enable DFS channels for FAP-432F with region code "K". |
7.4.1 and later |