Accessing FortiBranchSASE

By default, the FortiBranchSASE open ports are 80 (http), 443 (https), 22 (SSH), and 23 (Telnet).

To access the FortiBranchSASE web GUI from a computer:

1. Using an Ethernet cable, connect your computer to a FortiBranchSASE LAN port.

2. Configure your computer's network settings to the following:

   • IP Address: 192.168.200.100

   • Netmask: 255.255.255.0

3. Open a web browser and navigate to the default FortiBranchSASE web GUI address:

   https://192.168.200.99

4. Enter admin as the username.
5. Follow the on-screen CLI prompt to create your new password.

To access FortiBranchSASE using Telnet or SSH:

1. Using an Ethernet cable, connect your computer to Port 4 or Port 5 of the FortiBranchSASE.

2. Manually configure your computer's network settings to the following:

   • IP Address: 192.168.200.100

   • Subnet Mask: 255.255.255.0

3. Open a Telnet or SSH client (such as PuTTY or Terminal) and connect to IP address 192.168.200.99.

   • If using Telnet, use port 23.

   • If using SSH, use port 22.