Connect to the CLI
You can connect to the CLI through the FortiBranchSASE or FortiCloud GUI.
To access the FortiBranchSASE CLI via FortiCloud GUI, go to the device page of a deployed FortiBranchSASE device and click the >_Console section to open a new instance of the FortiBranchSASE console.
To access the FortiBranchSASE CLI via the FortiBranchSASE GUI, click the >_ tab on the left side of the GUI.
|
You can open only one console per GUI access. |
You can also access the FortiBranchSASE CLI outside of the GUI using:
-
Console connection — connect your computer directly to the console port of your FortiBranchSASE.
-
SSH or Telnet access — connect your computer through any network interface attached to one of the network ports of your FortiBranchSASE.