Proxy settings
Proxy-related information is contained inside the <proxy></proxy>
XML tags. If a proxy server configuration is required for Internet access, use the fields here to specify that configuration so that FortiClient's functions can use Fortinet's Internet-based services. Only FortiClient-originated traffic uses these settings.
<forticlient_configuration>
<system>
<proxy>
<update>0</update>
<fail_over_to_fdn>0</fail_over_to_fdn>
<online_scep>0</online_scep>
<virus_submission>0</virus_submission>
<type>http</type>
<address></address>
<port>80</port>
<username>Encrypted/NonEncrypted_UsernameString</username>
<password>Encrypted/NonEncrypted_PasswordString</password>
</proxy>
</system>
</forticlient_configuration>
The following table provides the XML tags for proxy settings, as well as the descriptions and default values where applicable.
XML tag |
Description |
Default value |
---|---|---|
<update> |
Enable or disable updates. Set the Boolean value to Boolean value: |
0 |
<fail_over_to_fdn> |
Enable or disable failover to FortiGuard servers. Boolean value: |
0 |
<online_scep> |
Enable or disable Simple Certificate Enrollment Protocol (SCEP). Set the Boolean value to Boolean value: |
0 |
<virus_submission> |
Enable or disable virus submission to the FortiGuard Distribution Network (FDN). Set the Boolean value to Boolean value: |
0 |
<type> |
The type of proxy being specified. Enter one of the following:
|
HTTP |
<address> |
|
|
<port> |
The proxy server's port number. Port range: 1 to 65535 |
80 |
<username> |
If the proxy requires authentication, specify the encrypted or non-encrypted username here. |
|
<password> |
If the proxy requires authentication, specify the encrypted or non-encrypted password here. |
|