You can create a Telemetry gateway list that contains IP addresses for one or multiple FortiGates and EMS servers. FortiClient searches for IP addresses in its subnet in the Telemetry gateway list and connects to the FortiGate in the list that is in the same subnet as the host system.
If FortiClient cannot find any FortiGates in its subnet, it attempts to connect to the first reachable FortiGate in the list, starting from the top. FortiClient maintains the list order as configured in the Telemetry gateway list.
- Go to Telemetry Gateway Lists > Manage Telemetry Gateway Lists.
- Click the Add button.
- Configure the following:
Enter the list name.
Enter additional comments (optional).
Connect to local subnets only
Only allow connection to local subnets.
Use connection key
Enable the connection key endpoints can use to connect to FortiGates.
New connection key
Enter the connection key.
Confirm new connection key
Reenter the connection key to confirm.
Managed by EMS
Select an option from the dropdown list. Users can configure this IP address in System Settings > Server.
Enter the IP address(es) or hostname(s) of the FortiGates. You can also use an FQDN.
Press the Enter key to add additional entries.
- Click Save.