Fortinet black logo

Resolved issues

Resolved issues

The following issues have been fixed in version 7.0.9. For inquiries about a particular bug, contact Customer Service & Support.

Endpoint control

Bug ID

Description

899960 FortiESNAC process stops after switching between two FortiSASE EMS services.

GUI

Bug ID

Description

892171 GUI gets blank screen and cannot connect to FortiSASE SSL VPN.

Install and upgrade

Bug ID

Description

868570

FortiesNAC.exe fails to run after EMS tries to deploy FortiClient (Windows) 7.2.0 build 668 Beta 1 to endpoint with FortiClient (Windows) 7.2.0 build 668 interim build installed.

880132 Uninstall using misexec command fails.

896152

FortiClient shows Update failed - Error occurred! popup after reboot.

898429

Reboot prompt for FortiClient (Windows) deployment does not work in Windows 11.

900228

Windows 11 22H2 FortiClient (Windows) upgrade deployment reboots immediately without asking user regardless of EMS configuration.

906337

FortiClient upgrade does not prompt for reboot as configured.

907340

Telemetry connection requires reboot after install.

Web Filter and plugin

Bug ID

Description

826697 Web Filter affects ConnectWise Automate.
870895 Web Filter blocks Docker pull.
892204 Web Filter blocks traffic for signing into some HTTP web servers.
900083 Upgrading FortiClient (Windows) to 7.0.8 causes problems accessing HTTP site.
907534 After clicking popup, FortiClient does not open the window to enable Allow in Incognito.

Zero Trust Telemetry

Bug ID

Description

886203 Telemetry stuck in syncing state.
911495 FortiClient (Windows) fails to autoregister to FortiClient Cloud due to Telemetry key mismatch.

Remote Access

Bug ID

Description

702764 IPsec VPN connection fails with Certificate Was Not Loaded error.
811458 FortiClient (Windows) cannot connect to SSL VPN after installing Windows update KB5013942.
824165 If tunnel-connect-without-reauth is enabled, SSL VPN reconnection does not work in some conditions when using tunnel-based FortiClient connection over PPP method.
825365 When disconnecting from VPN, FortiClient (Windows) does not restore Register this connection's IP to DNS checkbox.
829084 Redundant sort method does not work with redundant SAML authentication.
838380 FortiClient (Windows) removes autoconnect VPN tunnel user credentials after a couple of restarts.
847990 Network adapter keeps DNS registration disabled after FortiClient disconnects from SSL VPN.
856798 When BitLocker attached drive is not unlocked, EMS reports endpoint as having no disk encryption.
868337 IPsec VPN client OS is Windows 10, but FortiGate IKE debug log shows it as Windows 8.0.
884348 SSL VPN DTLS does not work with SAML.
886928 VPN before logon displays FortiClient (Windows) credentials prompt if using user@domain.local format for username.

899159

Azure AD and local user autoconnect do not work for the first time after installation.

906815

IPsec VPN autoconnect behaves erratically when Auto Connect Only When Off-Fabric is enabled.

907361 IPsec VPN IKE v1 and v2 blocking IPv6 does not work.

910215

When Auto Connect Only When Off-Fabric is enabled, VPN autoconnects when endpoint shifts from off- to on-fabric status.

923869 FortiClient tries multiple times to connect to VPN with Azure Active Directory autologin when user belongs to more than 100 groups.

Malware Protection and Sandbox

Bug ID

Description

833264 Antiexploit blocks Chrome without sharing payload details.

858120

Read/write restrictions over FortiClient pipe objects are improper.

903614 Number of blocked exploit count is mismatched on EMS.
917941 Sandbox exclusions do not work for shared drives.

ZTNA connection rules

Bug ID

Description

911024 Host keeps requesting new certificates after logging in to Windows.

919540

Password can be seen in plain text format in GUI logs with basic authentication enabled.

License

Bug ID

Description

904835 FortiClient (Windows) loses license after upgrade.

Logs

Bug ID

Description

923245 Logs do not include timezone.

Upgrade

Bug ID

Description

816531 FortiClient (Windows) signatures do not get updated.

Administration

Bug ID

Description

869731 scheduler.exe crashes sometimes.
869845 FortiClient (Windows) daemon crashes.

FSSO agent

Bug ID

Description

851036 FortiClient does not send IP address using mobility agent to FortiAuthenticator when on-premise.

Other

Bug ID

Description

861070 User can kill FortiClient (Windows) processes when FortiShield is running.
874474 update_task does not start as scheduled and ISDB signature is not updated.

893195

FortiTray crashes on 32- and 64-bit operating systems.

896137 DesktipID application does not work after installing FortiClient.

Resolved issues

The following issues have been fixed in version 7.0.9. For inquiries about a particular bug, contact Customer Service & Support.

Endpoint control

Bug ID

Description

899960 FortiESNAC process stops after switching between two FortiSASE EMS services.

GUI

Bug ID

Description

892171 GUI gets blank screen and cannot connect to FortiSASE SSL VPN.

Install and upgrade

Bug ID

Description

868570

FortiesNAC.exe fails to run after EMS tries to deploy FortiClient (Windows) 7.2.0 build 668 Beta 1 to endpoint with FortiClient (Windows) 7.2.0 build 668 interim build installed.

880132 Uninstall using misexec command fails.

896152

FortiClient shows Update failed - Error occurred! popup after reboot.

898429

Reboot prompt for FortiClient (Windows) deployment does not work in Windows 11.

900228

Windows 11 22H2 FortiClient (Windows) upgrade deployment reboots immediately without asking user regardless of EMS configuration.

906337

FortiClient upgrade does not prompt for reboot as configured.

907340

Telemetry connection requires reboot after install.

Web Filter and plugin

Bug ID

Description

826697 Web Filter affects ConnectWise Automate.
870895 Web Filter blocks Docker pull.
892204 Web Filter blocks traffic for signing into some HTTP web servers.
900083 Upgrading FortiClient (Windows) to 7.0.8 causes problems accessing HTTP site.
907534 After clicking popup, FortiClient does not open the window to enable Allow in Incognito.

Zero Trust Telemetry

Bug ID

Description

886203 Telemetry stuck in syncing state.
911495 FortiClient (Windows) fails to autoregister to FortiClient Cloud due to Telemetry key mismatch.

Remote Access

Bug ID

Description

702764 IPsec VPN connection fails with Certificate Was Not Loaded error.
811458 FortiClient (Windows) cannot connect to SSL VPN after installing Windows update KB5013942.
824165 If tunnel-connect-without-reauth is enabled, SSL VPN reconnection does not work in some conditions when using tunnel-based FortiClient connection over PPP method.
825365 When disconnecting from VPN, FortiClient (Windows) does not restore Register this connection's IP to DNS checkbox.
829084 Redundant sort method does not work with redundant SAML authentication.
838380 FortiClient (Windows) removes autoconnect VPN tunnel user credentials after a couple of restarts.
847990 Network adapter keeps DNS registration disabled after FortiClient disconnects from SSL VPN.
856798 When BitLocker attached drive is not unlocked, EMS reports endpoint as having no disk encryption.
868337 IPsec VPN client OS is Windows 10, but FortiGate IKE debug log shows it as Windows 8.0.
884348 SSL VPN DTLS does not work with SAML.
886928 VPN before logon displays FortiClient (Windows) credentials prompt if using user@domain.local format for username.

899159

Azure AD and local user autoconnect do not work for the first time after installation.

906815

IPsec VPN autoconnect behaves erratically when Auto Connect Only When Off-Fabric is enabled.

907361 IPsec VPN IKE v1 and v2 blocking IPv6 does not work.

910215

When Auto Connect Only When Off-Fabric is enabled, VPN autoconnects when endpoint shifts from off- to on-fabric status.

923869 FortiClient tries multiple times to connect to VPN with Azure Active Directory autologin when user belongs to more than 100 groups.

Malware Protection and Sandbox

Bug ID

Description

833264 Antiexploit blocks Chrome without sharing payload details.

858120

Read/write restrictions over FortiClient pipe objects are improper.

903614 Number of blocked exploit count is mismatched on EMS.
917941 Sandbox exclusions do not work for shared drives.

ZTNA connection rules

Bug ID

Description

911024 Host keeps requesting new certificates after logging in to Windows.

919540

Password can be seen in plain text format in GUI logs with basic authentication enabled.

License

Bug ID

Description

904835 FortiClient (Windows) loses license after upgrade.

Logs

Bug ID

Description

923245 Logs do not include timezone.

Upgrade

Bug ID

Description

816531 FortiClient (Windows) signatures do not get updated.

Administration

Bug ID

Description

869731 scheduler.exe crashes sometimes.
869845 FortiClient (Windows) daemon crashes.

FSSO agent

Bug ID

Description

851036 FortiClient does not send IP address using mobility agent to FortiAuthenticator when on-premise.

Other

Bug ID

Description

861070 User can kill FortiClient (Windows) processes when FortiShield is running.
874474 update_task does not start as scheduled and ISDB signature is not updated.

893195

FortiTray crashes on 32- and 64-bit operating systems.

896137 DesktipID application does not work after installing FortiClient.