Enable this option if you only need to convert the config from one mode to another mode instead of migrating the config into another device. When this option is enabled, only the source configuration needs to be input. Currently, 2 kinds of mode conversions are supported:

1. Policy mode to Profile mode conversion.
2. Interface Split conversion

FortiConverter needs the default configuration of the target device to extract interface or other information of the target device. The default configuration should contain the same VDOM as those in the source config.

So if the source device contains multiple VDOMs, users should also create VDOMs with the same name on the target device before back up the default configuration.

Enable this option to append configurations such as interface, route, Central-Nat table, and DHCP Server into the pre-exist configuration on the device.

Enable this option to migrate your hostname and alias in config system global setting.

Note that if the hostname in source config is the Serial Number, it’ll be skipped by converter even if this option is enabled.

When this option is enabled, those interfaces which do not have IPs and are not referenced anywhere in the config will be discarded directly.

When selected, the config will be converted from FortiOS NGFW Policy mode to Profile mode, instead of converting to another device.