config auto-switch

Description: Configures settings related to SIM card switching.

Set by-disconnect [enable | disable]

Set by-signal [enable | disable]

Set by-data-plan [enable | disable]

Set switch-back [by-time | by-timer]

Set switch-back-time (HH:MM) *only available if by-time is set

Set switch-back-timer (3600 – 2147483647)

Set cert-mode [enable | disable]

Set default-sim [sim1 | sim2 | by-carrier | by-cost]

Set preferred-carrier <name > *only available if default-sim is set to by-carrier

Set session-down-detection (1 – 60)

Set gps [enable | disable]

Set sim1-pin [enable | disable]

Set sim1-pin-code {0,4} *only accepts integers [0-9] when sim1-pin is enabled

Set sim2-pin [enable | disable]

Set sim2-pin-code {0,4} *only accepts integers [0-9] when sim2-pin is enabled

Unset

Show

End

Sample command:

config lte setting modem2
    set pause-modem-manager disable
    set default-sim sim1
    set session-down-detection 3
    set gps enable
    set sim1-pin disable
    set sim2-pin disable
    config auto-switch
        set by-disconnect disable
        set by-signal disable
        set by-data-plan disable
        set switch-back
    end
end
	Set Advanced [enable | disable]