config area
Description: Configure OSPF area settings.
config area
edit {ipv4-address}
set
unset
next
show
abort
end
delete {ipv4-address}
purge
show
end
Sample command:
config router ospf
config area
edit 0.0.0.0
| Parameter | Description | Type | Size | Default |
|---|---|---|---|---|
| config area |
OSPF area configuration. An area is a logical grouping of contiguous networks and routers in the same area with the same link-state database and topology. Note: The current release only supports Area 0 called the backbone area, and does not support multiple areas. All routers inside an area must have the same area ID to become OSPF neighbors. You can add Area 0 by editing Area 0.0.0.0 |
IPv4 address | - | none |