Change log
Date | Change description |
---|---|
October 21, 2022 |
Corrected the description of the |
May 10, 2022 |
Changes to FortiGate-6000 FGSP. |
September 10, 2021 |
Both FortiGate-6501Fs or FortiGate-6301Fs in an FGCP cluster must have the same number of active hard disks and the same RAID configuration. For more information, see Before you begin configuring HA and Basic FortiGate-6000 HA configuration. |
June 21, 2021 |
New section: VLAN ID 1 is reserved. Added information about support for load balancing sessions with the |
March 4, 2021 |
Added a note about requiring the Security Fabric to be enabled for normal operation to Confirming startup status. Some fixes to GUI descriptions. Added notes about changing the VDOM mode and HA, for example Before you begin configuring HA. Corrections to information about handling fragmented packets, see Load balancing TCP, UDP, and ICMP sessions with fragmented packets. |
January 22, 2021 |
Added information about FortiGate-6000F hardware generation 1 and generation 2, see FortiGate-6000F hardware generations. |
December 14, 2020 |
More information about support for the dedicated management interface feature added to FortiOS features that are not supported by FortiGate-6000 v6.4.2. |
December 7, 2020 |
New section: More ARP queries than expected for one device - potential issue on large WiFi networks. |
November 20, 2020 | FortiOS 6.4.2 document release. |