config web-proxy forward-server

Configure forward-server addresses.

config web-proxy forward-server

Description: Configure forward-server addresses.

edit <name>

set addr-type [ip|fqdn]

set ip {ipv4-address-any}

set fqdn {string}

set port {integer}

set healthcheck [disable|enable]

set monitor {string}

set server-down-option [block|pass]

set comment {string}

next

end

config web-proxy forward-server

Parameter	Description	Type	Size
addr-type	Address type of the forwarding proxy server: IP or FQDN.	option	-
	Option Description ip Use an IP address for the forwarding proxy server. fqdn Use the FQDN for the forwarding proxy server.
ip	Forward proxy server IP address.	ipv4-address-any	Not Specified
fqdn	Forward server Fully Qualified Domain Name (FQDN).	string	Maximum length: 255
port	Port number that the forwarding server expects to receive HTTP sessions on .	integer	Minimum value: 1 Maximum value: 65535
healthcheck	Enable/disable forward server health checking. Attempts to connect through the remote forwarding server to a destination to verify that the forwarding server is operating normally.	option	-
	Option Description disable Disable health checking. enable Enable health checking.
monitor	URL for forward server health check monitoring .	string	Maximum length: 255
server-down-option	Action to take when the forward server is found to be down: block sessions until the server is back up or pass sessions to their destination.	option	-
	Option Description block Block sessions until the server is back up. pass Pass sessions to their destination bypassing the forward server.
comment	Comment.	string	Maximum length: 63