config router isis
Configure IS-IS.
config router isis Description: Configure IS-IS. set adjacency-check [enable|disable] set adjacency-check6 [enable|disable] set adv-passive-only [enable|disable] set adv-passive-only6 [enable|disable] set auth-keychain-l1 {string} set auth-keychain-l2 {string} set auth-mode-l1 [password|md5] set auth-mode-l2 [password|md5] set auth-password-l1 {password} set auth-password-l2 {password} set auth-sendonly-l1 [enable|disable] set auth-sendonly-l2 [enable|disable] set default-originate [enable|disable] set default-originate6 [enable|disable] set dynamic-hostname [enable|disable] set ignore-lsp-errors [enable|disable] set is-type [level-1-2|level-1|...] config isis-interface Description: IS-IS interface configuration. edit <name> set status [enable|disable] set status6 [enable|disable] set network-type [broadcast|point-to-point|...] set circuit-type [level-1-2|level-1|...] set csnp-interval-l1 {integer} set csnp-interval-l2 {integer} set hello-interval-l1 {integer} set hello-interval-l2 {integer} set hello-multiplier-l1 {integer} set hello-multiplier-l2 {integer} set hello-padding [enable|disable] set lsp-interval {integer} set lsp-retransmit-interval {integer} set metric-l1 {integer} set metric-l2 {integer} set wide-metric-l1 {integer} set wide-metric-l2 {integer} set auth-password-l1 {password} set auth-password-l2 {password} set auth-keychain-l1 {string} set auth-keychain-l2 {string} set auth-send-only-l1 [enable|disable] set auth-send-only-l2 [enable|disable] set auth-mode-l1 [md5|password] set auth-mode-l2 [md5|password] set priority-l1 {integer} set priority-l2 {integer} set mesh-group [enable|disable] set mesh-group-id {integer} next end config isis-net Description: IS-IS net configuration. edit <id> set net {user} next end set lsp-gen-interval-l1 {integer} set lsp-gen-interval-l2 {integer} set lsp-refresh-interval {integer} set max-lsp-lifetime {integer} set metric-style [narrow|wide|...] set overload-bit [enable|disable] set overload-bit-on-startup {integer} set overload-bit-suppress {option1}, {option2}, ... config redistribute Description: IS-IS redistribute protocols. edit <protocol> set status [enable|disable] set metric {integer} set metric-type [external|internal] set level [level-1-2|level-1|...] set routemap {string} next end set redistribute-l1 [enable|disable] set redistribute-l1-list {string} set redistribute-l2 [enable|disable] set redistribute-l2-list {string} config redistribute6 Description: IS-IS IPv6 redistribution for routing protocols. edit <protocol> set status [enable|disable] set metric {integer} set metric-type [external|internal] set level [level-1-2|level-1|...] set routemap {string} next end set redistribute6-l1 [enable|disable] set redistribute6-l1-list {string} set redistribute6-l2 [enable|disable] set redistribute6-l2-list {string} set spf-interval-exp-l1 {user} set spf-interval-exp-l2 {user} config summary-address Description: IS-IS summary addresses. edit <id> set prefix {ipv4-classnet-any} set level [level-1-2|level-1|...] next end config summary-address6 Description: IS-IS IPv6 summary address. edit <id> set prefix6 {ipv6-prefix} set level [level-1-2|level-1|...] next end end
config router isis
Parameter |
Description |
Type |
Size |
|||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
adjacency-check |
Enable/disable adjacency check. |
option |
- |
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
adjacency-check6 |
Enable/disable IPv6 adjacency check. |
option |
- |
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
adv-passive-only |
Enable/disable IS-IS advertisement of passive interfaces only. |
option |
- |
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
adv-passive-only6 |
Enable/disable IPv6 IS-IS advertisement of passive interfaces only. |
option |
- |
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
auth-keychain-l1 |
Authentication key-chain for level 1 PDUs. |
string |
Maximum length: 35 |
|||||||||||||||||||||||||||||
auth-keychain-l2 |
Authentication key-chain for level 2 PDUs. |
string |
Maximum length: 35 |
|||||||||||||||||||||||||||||
auth-mode-l1 |
Level 1 authentication mode. |
option |
- |
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
auth-mode-l2 |
Level 2 authentication mode. |
option |
- |
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
auth-password-l1 |
Authentication password for level 1 PDUs. |
password |
Not Specified |
|||||||||||||||||||||||||||||
auth-password-l2 |
Authentication password for level 2 PDUs. |
password |
Not Specified |
|||||||||||||||||||||||||||||
auth-sendonly-l1 |
Enable/disable level 1 authentication send-only. |
option |
- |
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
auth-sendonly-l2 |
Enable/disable level 2 authentication send-only. |
option |
- |
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
default-originate |
Enable/disable distribution of default route information. |
option |
- |
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
default-originate6 |
Enable/disable distribution of default IPv6 route information. |
option |
- |
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
dynamic-hostname |
Enable/disable dynamic hostname. |
option |
- |
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
ignore-lsp-errors |
Enable/disable ignoring of LSP errors with bad checksums. |
option |
- |
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
is-type |
IS type. |
option |
- |
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
lsp-gen-interval-l1 |
Minimum interval for level 1 LSP regenerating. |
integer |
Minimum value: 1 Maximum value: 120 |
|||||||||||||||||||||||||||||
lsp-gen-interval-l2 |
Minimum interval for level 2 LSP regenerating. |
integer |
Minimum value: 1 Maximum value: 120 |
|||||||||||||||||||||||||||||
lsp-refresh-interval |
LSP refresh time in seconds. |
integer |
Minimum value: 1 Maximum value: 65535 |
|||||||||||||||||||||||||||||
max-lsp-lifetime |
Maximum LSP lifetime in seconds. |
integer |
Minimum value: 350 Maximum value: 65535 |
|||||||||||||||||||||||||||||
metric-style |
Use old-style (ISO 10589) or new-style packet formats |
option |
- |
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
overload-bit |
Enable/disable signal other routers not to use us in SPF. |
option |
- |
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
overload-bit-on-startup |
Overload-bit only temporarily after reboot. |
integer |
Minimum value: 5 Maximum value: 86400 |
|||||||||||||||||||||||||||||
overload-bit-suppress |
Suppress overload-bit for the specific prefixes. |
option |
- |
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
redistribute-l1 |
Enable/disable redistribution of level 1 routes into level 2. |
option |
- |
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
redistribute-l1-list |
Access-list for route redistribution from l1 to l2. |
string |
Maximum length: 35 |
|||||||||||||||||||||||||||||
redistribute-l2 |
Enable/disable redistribution of level 2 routes into level 1. |
option |
- |
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
redistribute-l2-list |
Access-list for route redistribution from l2 to l1. |
string |
Maximum length: 35 |
|||||||||||||||||||||||||||||
redistribute6-l1 |
Enable/disable redistribution of level 1 IPv6 routes into level 2. |
option |
- |
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
redistribute6-l1-list |
Access-list for IPv6 route redistribution from l1 to l2. |
string |
Maximum length: 35 |
|||||||||||||||||||||||||||||
redistribute6-l2 |
Enable/disable redistribution of level 2 IPv6 routes into level 1. |
option |
- |
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
redistribute6-l2-list |
Access-list for IPv6 route redistribution from l2 to l1. |
string |
Maximum length: 35 |
|||||||||||||||||||||||||||||
spf-interval-exp-l1 |
Level 1 SPF calculation delay. |
user |
Not Specified |
|||||||||||||||||||||||||||||
spf-interval-exp-l2 |
Level 2 SPF calculation delay. |
user |
Not Specified |
config isis-interface
Parameter |
Description |
Type |
Size |
|||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
name |
IS-IS interface name. |
string |
Maximum length: 15 |
|||||||||
status |
Enable/disable interface for IS-IS. |
option |
- |
|||||||||
|
|
|||||||||||
status6 |
Enable/disable IPv6 interface for IS-IS. |
option |
- |
|||||||||
|
|
|||||||||||
network-type |
IS-IS interface's network type |
option |
- |
|||||||||
|
|
|||||||||||
circuit-type |
IS-IS interface's circuit type |
option |
- |
|||||||||
|
|
|||||||||||
csnp-interval-l1 |
Level 1 CSNP interval. |
integer |
Minimum value: 1 Maximum value: 65535 |
|||||||||
csnp-interval-l2 |
Level 2 CSNP interval. |
integer |
Minimum value: 1 Maximum value: 65535 |
|||||||||
hello-interval-l1 |
Level 1 hello interval. |
integer |
Minimum value: 0 Maximum value: 65535 |
|||||||||
hello-interval-l2 |
Level 2 hello interval. |
integer |
Minimum value: 0 Maximum value: 65535 |
|||||||||
hello-multiplier-l1 |
Level 1 multiplier for Hello holding time. |
integer |
Minimum value: 2 Maximum value: 100 |
|||||||||
hello-multiplier-l2 |
Level 2 multiplier for Hello holding time. |
integer |
Minimum value: 2 Maximum value: 100 |
|||||||||
hello-padding |
Enable/disable padding to IS-IS hello packets. |
option |
- |
|||||||||
|
|
|||||||||||
lsp-interval |
LSP transmission interval (milliseconds). |
integer |
Minimum value: 1 Maximum value: 4294967295 |
|||||||||
lsp-retransmit-interval |
LSP retransmission interval (sec). |
integer |
Minimum value: 1 Maximum value: 65535 |
|||||||||
metric-l1 |
Level 1 metric for interface. |
integer |
Minimum value: 1 Maximum value: 63 |
|||||||||
metric-l2 |
Level 2 metric for interface. |
integer |
Minimum value: 1 Maximum value: 63 |
|||||||||
wide-metric-l1 |
Level 1 wide metric for interface. |
integer |
Minimum value: 1 Maximum value: 16777214 |
|||||||||
wide-metric-l2 |
Level 2 wide metric for interface. |
integer |
Minimum value: 1 Maximum value: 16777214 |
|||||||||
auth-password-l1 |
Authentication password for level 1 PDUs. |
password |
Not Specified |
|||||||||
auth-password-l2 |
Authentication password for level 2 PDUs. |
password |
Not Specified |
|||||||||
auth-keychain-l1 |
Authentication key-chain for level 1 PDUs. |
string |
Maximum length: 35 |
|||||||||
auth-keychain-l2 |
Authentication key-chain for level 2 PDUs. |
string |
Maximum length: 35 |
|||||||||
auth-send-only-l1 |
Enable/disable authentication send-only for level 1 PDUs. |
option |
- |
|||||||||
|
|
|||||||||||
auth-send-only-l2 |
Enable/disable authentication send-only for level 2 PDUs. |
option |
- |
|||||||||
|
|
|||||||||||
auth-mode-l1 |
Level 1 authentication mode. |
option |
- |
|||||||||
|
|
|||||||||||
auth-mode-l2 |
Level 2 authentication mode. |
option |
- |
|||||||||
|
|
|||||||||||
priority-l1 |
Level 1 priority. |
integer |
Minimum value: 0 Maximum value: 127 |
|||||||||
priority-l2 |
Level 2 priority. |
integer |
Minimum value: 0 Maximum value: 127 |
|||||||||
mesh-group |
Enable/disable IS-IS mesh group. |
option |
- |
|||||||||
|
|
|||||||||||
mesh-group-id |
Mesh group ID <0-4294967295>, 0: mesh-group blocked. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
config isis-net
Parameter |
Description |
Type |
Size |
---|---|---|---|
id |
isis-net ID. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
net |
IS-IS net xx.xxxx. ... .xxxx.xx. |
user |
Not Specified |
config redistribute
Parameter |
Description |
Type |
Size |
|||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
protocol |
Protocol name. |
string |
Maximum length: 35 |
|||||||||
status |
Status. |
option |
- |
|||||||||
|
|
|||||||||||
metric |
Metric. |
integer |
Minimum value: 0 Maximum value: 4261412864 |
|||||||||
metric-type |
Metric type. |
option |
- |
|||||||||
|
|
|||||||||||
level |
Level. |
option |
- |
|||||||||
|
|
|||||||||||
routemap |
Route map name. |
string |
Maximum length: 35 |
config redistribute6
Parameter |
Description |
Type |
Size |
|||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
protocol |
Protocol name. |
string |
Maximum length: 35 |
|||||||||
status |
Enable/disable redistribution. |
option |
- |
|||||||||
|
|
|||||||||||
metric |
Metric. |
integer |
Minimum value: 0 Maximum value: 4261412864 |
|||||||||
metric-type |
Metric type. |
option |
- |
|||||||||
|
|
|||||||||||
level |
Level. |
option |
- |
|||||||||
|
|
|||||||||||
routemap |
Route map name. |
string |
Maximum length: 35 |
config summary-address
Parameter |
Description |
Type |
Size |
|||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
id |
Summary address entry ID. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
|||||||||
prefix |
Prefix. |
ipv4-classnet-any |
Not Specified |
|||||||||
level |
Level. |
option |
- |
|||||||||
|
|
config summary-address6
Parameter |
Description |
Type |
Size |
|||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
id |
Prefix entry ID. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
|||||||||
prefix6 |
IPv6 prefix. |
ipv6-prefix |
Not Specified |
|||||||||
level |
Level. |
option |
- |
|||||||||
|
|