config system switch-interface
Description: Configure software switch interfaces by grouping physical and WiFi interfaces.
edit <name>
set vdom {string}
set span-dest-port {string}
set span-source-port <interface-name1>, <interface-name2>, ...
set member <interface-name1>, <interface-name2>, ...
set type [switch|hub]
set intra-switch-policy [implicit|explicit]
set span [disable|enable]
set span-direction [rx|tx|...]
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| vdom | VDOM that the software switch belongs to. | string | Maximum length: 31 |
| span-dest-port | SPAN destination port name. All traffic on the SPAN source ports is echoed to the SPAN destination port. | string | Maximum length: 15 |
span-source-port <interface-name> |
Physical interface name. Port spanning echoes all traffic on the SPAN source ports to the SPAN destination port. Physical interface name. |
string | Maximum length: 79 |
member <interface-name> |
Names of the interfaces that belong to the virtual switch. Physical interface name. |
string | Maximum length: 79 |
| type | Type of switch based on functionality: switch for normal functionality, or hub to duplicate packets to all port members. switch: Switch for normal switch functionality (available in NAT mode only). hub: Hub to duplicate packets to all member ports. |
option | - |
| intra-switch-policy | Allow any traffic between switch interfaces or require firewall policies to allow traffic between switch interfaces. implicit: Traffic between switch members is implicitly allowed. explicit: Traffic between switch members must match firewall policies. |
option | - |
| span | Enable/disable port spanning. Port spanning echoes traffic received by the software switch to the span destination port. disable: Disable port spanning. enable: Enable port spanning. |
option | - |
| span-direction | The direction in which the SPAN port operates, either: rx, tx, or both. rx: Copies only received packets from source SPAN ports to the destination SPAN port. tx: Copies only transmitted packets from source SPAN ports to the destination SPAN port. both: Copies both received and transmitted packets from source SPAN ports to the destination SPAN port. |
option | - |
config system switch-interface
Description: Configure software switch interfaces by grouping physical and WiFi interfaces.
edit <name>
set vdom {string}
set span-dest-port {string}
set span-source-port <interface-name1>, <interface-name2>, ...
set member <interface-name1>, <interface-name2>, ...
set type [switch|hub]
set intra-switch-policy [implicit|explicit]
set span [disable|enable]
set span-direction [rx|tx|...]
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| vdom | VDOM that the software switch belongs to. | string | Maximum length: 31 |
| span-dest-port | SPAN destination port name. All traffic on the SPAN source ports is echoed to the SPAN destination port. | string | Maximum length: 15 |
span-source-port <interface-name> |
Physical interface name. Port spanning echoes all traffic on the SPAN source ports to the SPAN destination port. Physical interface name. |
string | Maximum length: 79 |
member <interface-name> |
Names of the interfaces that belong to the virtual switch. Physical interface name. |
string | Maximum length: 79 |
| type | Type of switch based on functionality: switch for normal functionality, or hub to duplicate packets to all port members. switch: Switch for normal switch functionality (available in NAT mode only). hub: Hub to duplicate packets to all member ports. |
option | - |
| intra-switch-policy | Allow any traffic between switch interfaces or require firewall policies to allow traffic between switch interfaces. implicit: Traffic between switch members is implicitly allowed. explicit: Traffic between switch members must match firewall policies. |
option | - |
| span | Enable/disable port spanning. Port spanning echoes traffic received by the software switch to the span destination port. disable: Disable port spanning. enable: Enable port spanning. |
option | - |
| span-direction | The direction in which the SPAN port operates, either: rx, tx, or both. rx: Copies only received packets from source SPAN ports to the destination SPAN port. tx: Copies only transmitted packets from source SPAN ports to the destination SPAN port. both: Copies both received and transmitted packets from source SPAN ports to the destination SPAN port. |
option | - |